![]() |
clutch to high - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16) +--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11) +--- Thread: clutch to high (/showthread.php?tid=5016) |
clutch to high - karl1989 - 19-07-2012 hi guys i have recently had a new clutch, cable and gearbox fitted. since doing this ive noticed my clutch is near the top. is there any way to get it further down on the pedal?. cheers guys clutch to high - Jonny b - 19-07-2012 Slam the clutch to the floor a few times should sort out the auto adjust RE: clutch to high - Ruan - 19-07-2012 Auto adjust or manual adjust? IIRC cheapo clutch cables are manual adjust. RE: clutch to high - karl1989 - 19-07-2012 ok cheers. im not sure if its auto or manual adjust. when i fitted the cable there was a spring on the pedal that i took off and havent put it back on. is that adjuster? RE: clutch to high - strictly_perv - 19-07-2012 The auto adjuster is near the clutch lever arm. RE: clutch to high - karl1989 - 19-07-2012 (19-07-2012, 07:27 PM)strictly_derv Wrote: The auto adjuster is near the clutch lever arm. ah ok mate. ill try what jonny B says then hopefully it will be sorted ![]() RE: clutch to high - Ruan - 19-07-2012 Does the clutch cable have a threaded part and a nut hanging off the end of it where it attaches to the gearbox? If not and it has a big plastic concertina bit clipped to the subframe, that's your auto adjuster... RE: clutch to high - karl1989 - 19-07-2012 (19-07-2012, 10:06 PM)Ruan Wrote: Does the clutch cable have a threaded part and a nut hanging off the end of it where it attaches to the gearbox? ye there is like a black block that clips onto the subframe that i can remember. will look tomorrow and get a pic |