+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Suspension, Transmission, Handling & Braking (https://www.306oc.co.uk/forum/forumdisplay.php?fid=19)
+--- Thread: Rear Beam Rebuild kit (/showthread.php?tid=482)
Rear Beam Rebuild kit - Daniel306 - 18-12-2011
Found these on ebay, he says they are genuine, anyone want to do a group buy or is there any cheaper genuine ones?
http://www.ebay.co.uk/itm/Peugeot-205-3 ... 4a9ef9880b
Re: Rear Beam Rebuild kit - sweeney1987 - 18-12-2011
paragon pug stuff is always genuine in my experience.
I got a gen. set for â?¬70 over here, still never fitted it
Re: Rear Beam Rebuild kit - Poodle - 21-12-2011
I'm sure someone told me pug are cheaper when i picked up a set of these, sounded dubious to me but might be worth checking out...
Rear Beam Rebuild kit - Matt - 22-12-2011
I'd be interested in something like this, buying a beam for £20 want to rebuild before I put it on
Re: Rear Beam Rebuild kit - Daniel306 - 23-12-2011
any idea how much pug want for them? i need them asap
Re: Rear Beam Rebuild kit - Connor - 23-12-2011
Daniel306 Wrote:any idea how much pug want for them? i need them asap
Phone them and ask? Or check service box
Re: Rear Beam Rebuild kit - Daniel306 - 23-12-2011
cant find them in service box, il try phone in the morn if they are open
Re: Rear Beam Rebuild kit - Connor - 23-12-2011
There won't be a "kit" listed, will have to pick out the bits individually
Re: Rear Beam Rebuild kit - Daniel306 - 24-12-2011
is 100 a good price for all the parts?
Outer Bearings x 2
Inner Bearings x 2
Crossmember Seals x 2
Outer Seal Cups x 2
Suspension Arm Seals x 2
Crossmember Seals Ext x 2
Torsion Bar Studs x 2
Eccentric Washers x 2
Torsion Bar Torx Bolts x 2
Re: Rear Beam Rebuild kit - Gunge - 24-12-2011
Before buying parts i'd strip the beam to see if it can be rebuilt if the bearing has worn the shaft a new shaft is needed
Re: Rear Beam Rebuild kit - Connor - 24-12-2011
Personally when I rebuild mine, ill be replacing the shafts anyway
Re: Rear Beam Rebuild kit - Daniel306 - 25-12-2011
The car had no camber or any probs, got it apart, shafts are fine no marks at all, it was off a 80k 6, that was standard hight, im thinking that il just put two grease nipples in and fit it, il rebuild it total when it fails,
Re: Rear Beam Rebuild kit - Daniel306 - 26-12-2011
change of plan, just going to rebuild it now, i cant get a press untill the 9th and yet to get all the parts, is it possible to put the disks hubs on my drum arms for the mean time, i dont really want to buy new brakes for the drums just to put disks on in jan
Re: Rear Beam Rebuild kit - Connor - 26-12-2011
No, someone else wanted to do that not long ago, turns out the shafts are different