![]() |
Gearbox gear change? - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16) +--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11) +--- Thread: Gearbox gear change? (/showthread.php?tid=4754) |
Gearbox gear change? - Ben - 09-07-2012 Would it be possible to have the 5th gear from an HDI box in an XUD box? I don't have a spare one to poke around otherwise I would. Ta RE: Gearbox gear change? - karl1989 - 09-07-2012 just fit a HDI box ![]() RE: Gearbox gear change? - 4WayDiablo - 09-07-2012 Hdi box has longer ratios so doesn't keep you on boost so much though RE: Gearbox gear change? - Ben - 10-07-2012 Which is why I want an xud box with hdi 5th. I want an xud box for when I'm going through the gears but then a lower rpm when at a steady speed. RE: Gearbox gear change? - me-tm - 11-07-2012 How about the final drive from an XUD fitted to a '6 box instead? ![]() RE: Gearbox gear change? - Chris - 11-07-2012 HDI and DT box are the same bar the final drive giving the longer ratios throughout the box. And FYI the 6 box has a longer final drive than both the HDI and DT IIRC, if not its not much shorter as the hdi and the 6 are around the 3.8 region IIRC. RE: Gearbox gear change? - strictly_perv - 11-07-2012 (11-07-2012, 08:08 PM)Chris Wrote: HDI and DT box are the same bar the final drive giving the longer ratios throughout the box. Beat me to it. The 205 DTURBO box, 306 dt and HDI have the same gears just a different final drive. If you want short is gears get a '6 box and some 20" rims ![]() Troll out. |