+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Suspension, Transmission, Handling & Braking (https://www.306oc.co.uk/forum/forumdisplay.php?fid=19)
+--- Thread: Pulling to the right (/showthread.php?tid=4724)
Pages:
1
2
Pulling to the right - Niall - 08-07-2012
Right I'm a bit stumped by this one.
Fitted newish wishbones (known good ones from my previous car) had tracking done, wheels balanced and yet it still pulls to the right.
Any ideas?
RE: Pulling to the right - Scott - 08-07-2012
Is it only pulling that way since you fixed your PAS yesterday?
RE: Pulling to the right - Niall - 08-07-2012
Nope. Been doing it for a while. Thought it might of been due to the ram but fitting the new one hasn't fixed it
RE: Pulling to the right - Scott - 08-07-2012
Well then it's f*cked.
RE: Pulling to the right - declantg - 08-07-2012
Have you checked your tyre pressures?
RE: Pulling to the right - Connor - 08-07-2012
Car is clearly fascist...
Pulling to the right - ash240970 - 09-07-2012
(08-07-2012, 11:33 PM)Connor Wrote: Car is clearly fascist...
:flol:
RE: Pulling to the right - Matt - 09-07-2012
Mine is also doing this, only when breaking. Think it's due a break imbalance/crappy droplinks
RE: Pulling to the right - mark_airey - 09-07-2012
Was the tracking actually done, or did they just tell you they had? because to me that sounds like either a soft tyre on the front right or the tracking, if they had done the tracking properly everything should be straight and correct so it can't really be related to suspension components being out of line!
Just another thought, the bottom of your hub isn't ovalled out is it allowing the ball joint to move around?
RE: Pulling to the right - Kimmie - 09-07-2012
I agree with Scott, it's just f*cked.
Having said that, since changing the wishbones on my '6, I know get a loud clunking noise below the driver's side footwell well pulling off and sometimes breaking.
Stupid french cars!
RE: Pulling to the right - Pompey306mark - 09-07-2012
I have that sound when I reserve quicky or let off quickly after accelerating.
I would have said bad tracking to be fair.
RE: Pulling to the right - lewisdmz - 09-07-2012
Have you swapped the rear beam over from your old steed?
RE: Pulling to the right - Niall - 09-07-2012
Haven't checked tyre pressures (miss simplest of things eh?)
Tracking was definitely done. I watched him do it and saw the end result and it was fine.
Rear beam is the original gti one with new standard mounts.
Fitted new wishbones and I'm 99% sure the hub was fine. There was no play at all.
RE: Pulling to the right - Toms306 - 09-07-2012
Any brakes binding at all? Front right as thats the way its pulling?
RE: Pulling to the right - Niall - 09-07-2012
Not that I'm aware of Tom. Front calipers are fine and rears are shot but I'm positive there not binding.
RE: Pulling to the right - Toms306 - 09-07-2012
Fair enough, everyones running out of ideas now I think lol. :/
RE: Pulling to the right - daddyfixit - 09-07-2012
(09-07-2012, 04:56 PM)Toms306 Wrote: Fair enough, everyones running out of ideas now I think lol. :/
swap the 2 front wheels from side to side (left with right)
once a tyre has started conical wearing , no matter who/how/when you check the tracking it will still pull over.
by putting tyres onto opposite sides of the axle, it will counteract the wear and drive straight.
RE: Pulling to the right - KrisB - 09-07-2012
I need to swap my fronts over. I keep having the tracking donebut its soooo annoying having to stop your car drifting onto the other side of the road. No usual tracking induced tyre wear either. :/
RE: Pulling to the right - Niall - 09-07-2012
(09-07-2012, 05:55 PM)daddyfixit Wrote:(09-07-2012, 04:56 PM)Toms306 Wrote: Fair enough, everyones running out of ideas now I think lol. :/
swap the 2 front wheels from side to side (left with right)
once a tyre has started conical wearing , no matter who/how/when you check the tracking it will still pull over.
by putting tyres onto opposite sides of the axle, it will counteract the wear and drive straight.
Great idea but t1rs are directional tyres so they will be spinning the wrong way....I think. Too much strongbow to think about it!
RE: Pulling to the right - samass - 10-07-2012
maybe somethings rusty?
trololol
everyones said what i can think of, so figured id troll.
RE: Pulling to the right - daddyfixit - 10-07-2012
if the tyres are directional , you will have to swap the tyre off the rim then
or swap front to rear on the same side ?
RE: Pulling to the right - Ben Jay - 10-07-2012
My new one is doing this. got it tracked up and did tyre pressures and still no difference...ill swap the tyres around this weekend.
i guess i could swap the rear and the front around to see if it makes a difference?
RE: Pulling to the right - mark_airey - 10-07-2012
(10-07-2012, 08:16 AM)Ben Jay Wrote: My new one is doing this. got it tracked up and did tyre pressures and still no difference...ill swap the tyres around this weekend.
i guess i could swap the rear and the front around to see if it makes a difference?
Hmmmmm................I shall quote the post above yours..........not really sure............
(10-07-2012, 07:12 AM)daddyfixit Wrote: if the tyres are directional , you will have to swap the tyre off the rim then
or swap front to rear on the same side ?
RE: Pulling to the right - Ben Jay - 10-07-2012
didnt see daddyfixits post haha
ill give that a go tonight when i get back and see if theres any difference
RE: Pulling to the right - mark_airey - 10-07-2012
(10-07-2012, 08:21 AM)Ben Jay Wrote: didnt see daddyfixits post haha
ill give that a go tonight when i get back and see if theres any difference
Can I suggest that you read threads properly before posting silly questions that have already been answered
RE: Pulling to the right - Poodle - 13-07-2012
(09-07-2012, 05:55 PM)daddyfixit Wrote: once a tyre has started conical wearing , no matter who/how/when you check the tracking it will still pull over.
by putting tyres onto opposite sides of the axle, it will counteract the wear and drive straight.
This. Unfortunately, if this doesn't fix it, then you should be looking for crash damage around the chassis.
RE: Pulling to the right - DiabloTom92 - 16-07-2012
Have you tried changing the top mounts on the front struts? mines pulling to the right so much it hurts my arm on long journeys, and i know for a fact the drivers side top mount bearing is falling apart.
Just another thing on the to do list
RE: Pulling to the right - Birk - 16-07-2012
Wishbone bush's or ball joints.
RE: Pulling to the right - Niall - 16-07-2012
Right top mounts have only done about 10k, same as wishbones but there on their way out. I still reckon it could be that my beam isnt aligned but will straighten it up tomorrow and see.
RE: Pulling to the right - Birk - 17-07-2012
They can't be aligned, the sit in a set place.