+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26)
+--- Forum: Misc & Wanted (https://www.306oc.co.uk/forum/forumdisplay.php?fid=14)
+--- Thread: Wanted: 20mm hubcentric spacers. (/showthread.php?tid=4556)
20mm hubcentric spacers. - kingy - 30-06-2012
as titled. x2 please. pm me with details.
RE: needed. 20mm hubcentric spacers. - Matt - 30-06-2012
Peugeot to Peugeot? If not I have Peugeot to after market
RE: needed. 20mm hubcentric spacers. - kingy - 30-06-2012
for my after market ones matt. foxy jim sold me a naff set and one of my wheels is only held on with 3 bolts so need to get this sorted. got spigot rings.
RE: needed. 20mm hubcentric spacers. - Matt - 30-06-2012
What's the centre bore measurement? My spacers have the Peugeot bore on inside and the after market wheel size on the outside. Iirc I'll take a look when I can be bothered to actually move haha
RE: needed. 20mm hubcentric spacers. - kingy - 30-06-2012
dont know mate. all i know is the wheels needed spigot rings to fit the spaceres. how do i find out and how much do you want for them if they are the right ones buddy. posted.
RE: needed. 20mm hubcentric spacers. - Matt - 30-06-2012
Posted do em for £20?
It sounds like they are the standard after market size. Checked mine and you need spigot rings on the inside of the spacer, so the inner of the spacer will fit onto the normal pug hub with a ring, and the outer will slot into the wheel with no rings.
Oh and they are hubcentric
RE: needed. 20mm hubcentric spacers. - kingy - 30-06-2012
are the threads ok on em matt? if so i will have em off ya.
RE: needed. 20mm hubcentric spacers. - Matt - 30-06-2012
Threads? These are ones that you use extended bolts on
RE: needed. 20mm hubcentric spacers. - kingy - 30-06-2012
ahhhr, with ya. are these ok. heard bad things about em. i got the bolt to the hub then bolt to the spacer kind. witch one is best.
RE: needed. 20mm hubcentric spacers. - strictly_perv - 30-06-2012
Can't you just re-tap the thread?
RE: needed. 20mm hubcentric spacers. - kingy - 30-06-2012
when i bought the wheels the lad said hes HAD THE THREADS CLEANED but the bolt had a slight bit of play in it. after putting then on my car for the first time i was never happy with them and had no confidence. after i did my wheels and put them back on (with the spacers) on of the bolts just span. i could get them re threaded but wouldnt i need bigger (wider) bolts?
needed. 20mm hubcentric spacers. - kentiiboii - 30-06-2012
I have same as mate Kingy but 15mm mine are stud conversions as well. At first I was very nervous about them but after a few weeks and checking them for a 4th time I've decided they're safe
RE: needed. 20mm hubcentric spacers. - kingy - 30-06-2012
might just sell my wheels.
needed. 20mm hubcentric spacers. - kentiiboii - 30-06-2012
It's a shame I know where thereS a nice set of Aidels. As I need some money for my computer build but I know soon as I get I'll smash one of mine on a pot hole.
RE: needed. 20mm hubcentric spacers. - kingy - 30-06-2012
dont you still need spacers for yours?
RE: 20mm hubcentric spacers. - HDIkyle - 01-07-2012
Get it helicoiled. Keeps the same thread size them
RE: 20mm hubcentric spacers. - kingy - 01-07-2012
how does this work?