+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Electrics (https://www.306oc.co.uk/forum/forumdisplay.php?fid=23)
+--- Thread: Electric rear window conversion (/showthread.php?tid=4522)
Electric rear window conversion - ash240970 - 28-06-2012
My 5 dr Dtub doesn't have the wiring under the centre console for switches but I have a loom out of a 5dr Hdi and the rear doors that I have recently fitted have the motors and wiring all ready to go.
Has anyone just fitted the loom to the switches and doors and just fed them with a live and earth? - if so which wires did you cut and which did you feed lives to?
RE: Electric rear window conversion - Eeyore - 28-06-2012
think there might be a bit more to it than that as you also need the window imobiliser button next to the headlight adjustment panel.
RE: Electric rear window conversion - Just Sean - 28-06-2012
Ive got a 5 door meridian, all the loom i needed was in the car. All i needed was the leccy rear windows and the window immobiliser that goes into the dash underneath the headlight adjustment roller.
Not much help probably!
Sorry chap!
Electric rear window conversion - ash240970 - 28-06-2012
I've got the switch and actually the loom I have is a complete interior loom inc wiring to switches and all the way under the dash but it also has looms to the front doors and to the seats. The problem I have with this loom is the wiring for the seats is the 3 different connectors each side a la side airbags in the seats whereas my car only has the 1 wire for pretensioners.
I'm sure someone on here has done the mod without the dash switch