+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11)
+--- Thread: Removing Injectors (/showthread.php?tid=4325)
Removing Injectors - Dicky - 20-06-2012
Is there an easy way of removing injectors from my car without an injector tool? From what I remember of doing my old engine I stuggled like f*ck to take them out..
Plus side injector seals were £6.40 for 4 from pug
Re: Removing Injectors - Diggers - 20-06-2012
What engine? If its dturbo, 27mm deep socket from halfords then return it after
Sent from my HTC Wildfire using Tapatalk
RE: Removing Injectors - Mattcheese31 - 20-06-2012
27mm draper deep socket is about 6 quid on ebay . . . .you'll want to use a breaker bar as well . .
RE: Removing Injectors - ginge191 - 20-06-2012
(20-06-2012, 03:35 PM)Diggers Wrote: What engine? If its dturbo, 27mm deep socket from halfords then return it after
Sent from my HTC Wildfire using Tapatalk
halfords "DEEP" sockets are not deep enough FYI... the one i bought was as useful as a chocolate teapot
Draper deep sockets online suffice.
RE: Removing Injectors - mark_airey - 20-06-2012
Or you could get a specific injector socket so you don't f*ck up the leak off connections on the injectors :rolleys:
Bunch of fooking pikeys I tell you!
you want this one - http://www.ebay.co.uk/itm/Draper-Expert-27Mm-1-2-quot-Square-Drive-Diesel-Injector-Socket-/221048109062?pt=LH_DefaultDomain_3&hash=item33777e7806#ht_1052wt_1004
Also FYI halfords do also sell injector sockets
RE: Removing Injectors - Diggers - 20-06-2012
(20-06-2012, 03:41 PM)ginge191 Wrote:(20-06-2012, 03:35 PM)Diggers Wrote: What engine? If its dturbo, 27mm deep socket from halfords then return it after
Sent from my HTC Wildfire using Tapatalk
halfords "DEEP" sockets are not deep enough FYI... the one i bought was as useful as a chocolate teapot
Draper deep sockets online suffice.
how deep you need it? :o
it worked for me, their diesel injector deep socket didnt fit thou
RE: Removing Injectors - ginge191 - 20-06-2012
(20-06-2012, 03:46 PM)Diggers Wrote:(20-06-2012, 03:41 PM)ginge191 Wrote:(20-06-2012, 03:35 PM)Diggers Wrote: What engine? If its dturbo, 27mm deep socket from halfords then return it after
Sent from my HTC Wildfire using Tapatalk
halfords "DEEP" sockets are not deep enough FYI... the one i bought was as useful as a chocolate teapot
Draper deep sockets online suffice.
how deep you need it? :o
it worked for me, their diesel injector deep socket didnt fit thou
that one
RE: Removing Injectors - Dan! - 20-06-2012
FYI Halfords 27mm normal deep socket works fine, plenty deep enough and never broken any leak off tabs.
RE: Removing Injectors - Mattcheese31 - 20-06-2012
(20-06-2012, 03:46 PM)mark_airey Wrote: Or you could get a specific injector socket so you don't f*ck up the leak off connections on the injectors :rolleys:
Bunch of fooking pikeys I tell you!
you want this one - http://www.ebay.co.uk/itm/Draper-Expert-27Mm-1-2-quot-Square-Drive-Diesel-Injector-Socket-/221048109062?pt=LH_DefaultDomain_3&hash=item33777e7806#ht_1052wt_1004
Also FYI halfords do also sell injector sockets
cheers Mark, that's what i meant, that's what i got and was fine . .
Removing Injectors - TheGateKeeper - 20-06-2012
The halfords one by me was useless aswell. Different ones must stock different injector sockets
RE: Removing Injectors - Diggers - 20-06-2012
(20-06-2012, 03:48 PM)Dan! Wrote: FYI Halfords 27mm normal deep socket works fine, plenty deep enough and never broken any leak off tabs.
thats the one i ment, hence why i just put 27mm deep not injector socket, cos the injector one doesnt go over the leak offs