+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11)
+--- Thread: 306 Driveshafts (/showthread.php?tid=4288)
306 Driveshafts - Bananalad - 19-06-2012
Im looking for a passenger side drive shaft for my phase 1 dturbo, is there differences in the other phases/models? Thanks
RE: 306 Driveshafts - Bananalad - 19-06-2012
I need an answer as fast as possible as i want to buy one today
Sorry for the quick bump!
RE: 306 Driveshafts - samass - 19-06-2012
should be the same as all XU engined cars. (1.8, 2.0 xsi, 2.0 gti, 1.9d, 1.9DT)
RE: 306 Driveshafts - Bananalad - 19-06-2012
Rang a scrappy and he told me there is a different amount of splines between phase one and phase 2? Is this true?
RE: 306 Driveshafts - samass - 19-06-2012
that, i couldn't tell you. but i didn't think there was as all the gearboxes are interchangeable, i think.
RE: 306 Driveshafts - Bananalad - 19-06-2012
Thats a good point actually.. You dont need to change drive shafts when putting on a hdi box so they have to be the same........ Anyone confirm this
RE: 306 Driveshafts - sweeney1987 - 19-06-2012
all xu are same fitment. has your car abs though?
need one of an abs car if you do iirc
RE: 306 Driveshafts - samass - 19-06-2012
could always get a lift to the scrappy, and take your old one with you. then just compare them
RE: 306 Driveshafts - Bananalad - 19-06-2012
No dont think it has abs.. Ill check now
Ill do that samass
RE: 306 Driveshafts - mark_airey - 19-06-2012
Only difference I know of is the ABS sensor ring being present or not!
RE: 306 Driveshafts - sweeney1987 - 19-06-2012
short shaft youre looking for?
id say i have one off an abs xsara here if youre stuck
infact think i have a few different ones in the shed but i cant currently get in it :/
RE: 306 Driveshafts - samass - 19-06-2012
ah yeah, good point sweeny, abs! easy to check, just look for a pumpy looking thing with lots of brake lines going into it at the front of the passenger side chassis leg in the engine bay, behind the headlight
RE: 306 Driveshafts - Bananalad - 19-06-2012
Thanks sweeney i was only up your way yesterday too for the rally
Think i have one sorted.. If i put a non abs shaft into one with abs what would happen? Just not click into place?Nope no abs
RE: 306 Driveshafts - sweeney1987 - 19-06-2012
my way? im not from donegal?
didnt think there was a rally in cavan :$
If you dd that id imagine the abs wouldnt work
RE: 306 Driveshafts - Bananalad - 19-06-2012
I came from carlow heading for donegal
Good point Can i make an abs driveshaft fit one without and how do i do it