+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11)
+--- Thread: Clutch query (/showthread.php?tid=4154)
Clutch query - WiNgNuTz - 13-06-2012
Im going to be replacing my clutch at some point in the near future, and i figured as im going to do it, i might as well upgrade it, to allow for future power mods.
I THOUGHT i'd seen somewhere that using an HDI clutch would effectively be an upgrade, but im beginning to wonder if i've got that backwards. :?
Can anyone shed some light on this for me, as searching has left me with a bit of a headache, and not really any further forward than i was. Alternatively, if anyone can recommend an uprated clutch to use with the xud 'box, i'd be gladly appreciative (if thats actually a word!
)Ta muchly!
Re: Clutch query - D@wson - 13-06-2012
I think you may have that backwards :S
Re: Clutch query - vlj - 13-06-2012
Also been looking for an answer to this as my clutch is well on it's way out
Re: Clutch query - WiNgNuTz - 13-06-2012
D@wson Wrote:I think you may have that backwards :SSo the XUD clutch in the HDI is the upgrade? Dammit
Re: Clutch query - Anton - 13-06-2012
An xud clutch (valeo) is fine for 200bhp, 280lbft. Around £90
Re: Clutch query - WiNgNuTz - 13-06-2012
Win. Ill stick with the standard clutch then!
Re: Clutch query - 4WayDiablo - 14-06-2012
Might not hold 200 bhp. I know they will start to slip after a larger turbo
Mine ever so slightly now and again will slip but its very rare
Re: Clutch query - Jtrigga - 14-06-2012
No need for uprated clutch just stick to a standard valeo. You can change the XUD gearbox to a hdi for different gear ratios.
Re: Clutch query - WiNgNuTz - 14-06-2012
I'm gonna skip the hdi 'box, as I don't do enough motorway miles to warrant the lower rpm at 70mph, and would rather not suffer with more lag between 2nd and 3rd.
I've got a fair way to go before I'm pushing the 200bhp Mark though, aiming for 140-160ish at the moment, but it'll be slow progress due to funding issues! ;-)
EDIT: What sort of power are you making 4way, any idea?