+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Electrics (https://www.306oc.co.uk/forum/forumdisplay.php?fid=23)
+--- Thread: Phase 2 windows into a Phase 1 (/showthread.php?tid=3931)
Phase 2 windows into a Phase 1 - mclearg - 04-06-2012
Hi All, I have a phase 2 on my drive that's about to get taken away for scrap. My Phase 1 drivers window (both 3 doors) has given up the ghost.
I had bought what I though was the correct part from Window regulators onloine but I've ended up with the bit for the Phase 2 - bugger
Whilst stripping it all out on Sunday morning I got to thinking, will the entire window mechanism from the Phase 2 fit in the Phase 1? Apart from the connector type for the motor I can't see any differences. I am okay with a solder bolt so changing the connector doesn't phase me.
Any help would be greatly appreciated.
Regards,
Gordon
Re: Phase 2 windows into a Phase 1 - 4WayDiablo - 04-06-2012
What was it that was different between the phases?
A 3dr to 3dr should be fine its just the 3dr to 5dr that differs massivly
Re: Phase 2 windows into a Phase 1 - mclearg - 04-06-2012
There is a difference in window regulators I know trhat but i was thinking I could swap over the entire ting, window, runner, motor etc.
I was hopeing that someone else had done it to save me the AAARGH moment after stripping out both of them only then finding out it won't go.
Re: Phase 2 windows into a Phase 1 - mclearg - 08-06-2012
Picking up regulators from a member of 306oc on Sunday so all's good :-)
Re: Phase 2 windows into a Phase 1 - puglove - 10-06-2012
mclearg Wrote:There is a difference in window regulators I know trhat but i was thinking I could swap over the entire ting, window, runner, motor etc.
I was hopeing that someone else had done it to save me the AAARGH moment after stripping out both of them only then finding out it won't go.
It can all be swaped over. I put a ph1 3door s16 reg/runner ect in the mrs ph2 xsi. no problems
Re: Phase 2 windows into a Phase 1 - mclearg - 10-06-2012
Thanks I'll be trying to swap them over next weekend
G