+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Suspension, Transmission, Handling & Braking (https://www.306oc.co.uk/forum/forumdisplay.php?fid=19)
+--- Thread: Wheels offset (/showthread.php?tid=36980)
Wheels offset - arooscroocked - 23-07-2018
Hi guys,
Recently I started to think about getting my hands on some 15' alloys - I found a set of nice looking ones but there is one problem - offset
.From what I heard this Pugs needs about 15mm with 6,5" alloy width - the ones I found have 35 offset on 6,5".
Do you have any experience on mounting alloys with such high offset in 306?
RE: Wheels offset - Poodle - 24-07-2018
They will rub the inner arches badly if they fit, but they probably just won't fit at all. To run them you would need 20mm hubcentric spacers and a set of matching longer bolts. Don't forget to check the centre bore matches, if it doesn't you can always get hubcentric spacers with staggered spigot/bore size.