+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26)
+--- Forum: Parts (https://www.306oc.co.uk/forum/forumdisplay.php?fid=25)
+--- Thread: 3D printed cupholder (/showthread.php?tid=36978)
3D printed cupholder - martyn92 - 23-07-2018
Hi all,
Just looking to see if there would be any interest in a 3D printed cup holder.
I've made one to fit behind the handbrake when you remove the old tray.
It will comfortably hold a normal sized 330ml can but not anything wider
Now, it is 3D printed at home and the results will vary with some minor defects on each one mainly the top surface. It may get better over time once I make a few changes to the printer.
Hopefully they will look closer the holder on the left but wont be any worse than the one on the right.
I'd be looking for £13 posted. Please bear in mind it takes 2 hours to print plus materials.
Any thoughts good or bad welcome!
Martyn
RE: 3D printed cupholder - gti6man - 23-07-2018
Yep I would be interested in this
one of the annoying things is having a can or bottle rolling round in the passenger footwell cause there is nowhere else for it.Would it be the same colour plastic as the centre console?
RE: 3D printed cupholder - martyn92 - 23-07-2018
It would be printed in the colour as shown (or possibly another colour of your choosing!). Its black but not glossy, its more matte if anything.
RE: 3D printed cupholder - Piggy - 23-07-2018
Hasn't Sam already done this?
RE: 3D printed cupholder - Mattcheese31 - 23-07-2018
fair price
RE: 3D printed cupholder - Chris HDI - 23-07-2018
Interested! Fair price, you got some to sell right now?
RE: 3D printed cupholder - martyn92 - 23-07-2018
Yeah I've got one ready to go!
RE: 3D printed cupholder - gti6man - 23-07-2018
For some reason I can't see the pics in this post. Could you pm me a pic but yeah I'll be up for having one when you have another available.
RE: 3D printed cupholder - martyn92 - 23-07-2018
Sent you a PM gti6man, I will make another tomorrow so just let me know!
Martyn
RE: 3D printed cupholder - Eeyore - 24-07-2018
(23-07-2018, 10:04 AM)Piggy Wrote: Hasn't Sam already done this?
thats mad! Yeh I have but nobody was interested at the time and its difficult to print in one piece.
RE: 3D printed cupholder - hovis16 - 25-07-2018
May have one of these as well
RE: 3D printed cupholder - Chris HDI - 26-07-2018
Got mine today, sanded the face down a bit to try improve the finish and just gave it a quick coat of black, looks well.
RE: 3D printed cupholder - martyn92 - 06-08-2018
Just to update this, I've made improvements to the print so the top surface is now much more smooth.
I have a couple made up and ready if interested
![[Image: 20180805_164045_zpsbdakpgxf.jpg]](http://s799.photobucket.com/user/martyn992/media/20180805_164045_zpsbdakpgxf.jpg.html)