+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20)
+--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3)
+--- Thread: Nialls supercharged GTi6 - project tidy up (/showthread.php?tid=3684)
RE: Nialls GTi6 - Charging almost there - Grant - 01-02-2014
Top day, bring on tomorrow!
I wanna swing around on the crane again
RE: Nialls GTi6 - Charging almost there - floz123 - 01-02-2014
Good work guys! Keep it up
RE: Nialls GTi6 - Charging almost there - Niall - 01-02-2014
(01-02-2014, 05:12 PM)Grant Wrote: Top day, bring on tomorrow!
I wanna swing around on the crane again
Was so tempted to do a wrecking ball photo but thought better of it
Re: Nialls GTi6 - Charging almost there - floz123 - 01-02-2014
Hahahah do it please! Let those plums run free!
RE: Nialls GTi6 - Charging almost there - Niall - 01-02-2014
(01-02-2014, 05:14 PM)floz123 Wrote: Hahahah do it please! Let those plums run free!
Ill get my plums out for you if you really want although I'm going to tell you now, it will be cold with them on that cold metal
Re: Nialls GTi6 - Charging almost there - floz123 - 01-02-2014
Such a poor excuse. Getting all defensive already
RE: Nialls GTi6 - Charging almost there - Niall - 01-02-2014
(01-02-2014, 05:17 PM)floz123 Wrote: Such a poor excuse. Getting all defensive already
Alright I've got a tiny cock and balls. Don't rub it in man!!
RE: Nialls GTi6 - Charging almost there - Grant - 01-02-2014
Challenge accepted Niall?
RE: Nialls GTi6 - Charging almost there - floz123 - 01-02-2014
I expect to see proof of this tomorrow! I'd like to be there but unfortunately I'm busy :p
RE: Nialls GTi6 - Charging almost there - cully - 01-02-2014
Good effort niall hope grant did more than make tea
RE: Nialls GTi6 - Charging almost there - Grant - 01-02-2014
Cheeky cnut
RE: Nialls GTi6 - Engine going in - Tom - 01-02-2014
Solid progress guys well done. Hopefully running tomorrow...
RE: Nialls GTi6 - Engine going in - Niall - 01-02-2014
(01-02-2014, 06:29 PM)Tom Wrote: Solid progress guys well done. Hopefully running tomorrow...
Wont be running tomorrow. I need some flywheel bolts which Peugeot have got for me but they are not open until monday so it will go in on monday and hopefully running N/A by money afternoon
RE: Nialls GTi6 - Engine going in - floz123 - 01-02-2014
Dude you should have asked. I've got a set in that 1.8 unless you want new ones of course lol
RE: Nialls GTi6 - Engine going in - Grant - 01-02-2014
(01-02-2014, 06:34 PM)floz123 Wrote: Dude you should have asked. I've got a set in that 1.8 unless you want new ones of course lol
Let me know when you chuck that away. I'll come and take it off you for a good price. I won't charge too much for clearance
:p
RE: Nialls GTi6 - Engine going in - floz123 - 01-02-2014
Haha you cheeky feck
decided we're gonna make it a bench engine and probably turbo it :p
RE: Nialls GTi6 - Engine going in - Niall - 01-02-2014
(01-02-2014, 06:34 PM)floz123 Wrote: Dude you should have asked. I've got a set in that 1.8 unless you want new ones of course lol
Cheers man but i wanted brand new ones tbh. When you have a big chunky bit of metal spinning at 7k+, i want to make sure it doesn't break free. They make a bit of a mess when they do!
(01-02-2014, 06:36 PM)floz123 Wrote: Haha you cheeky feck
Yeah sorry grant me and Dan were chatting about this the other night. Its getting several turbos on it.....ive decided
RE: Nialls GTi6 - Engine going in - Grant - 01-02-2014
Even better then! lol. Let me know when you've done that and I'll fit it :p
RE: Nialls GTi6 - Engine going in - floz123 - 01-02-2014
Was thinking grant...perhaps we could put a new rear end in yours and rear mount the bastard into it :p turbo powerrr!!
7k....is that it
just kidding
RE: Nialls GTi6 - Engine going in - Grant - 01-02-2014
Haha yeah always a good shout! I'm more angling towards a rear mount gearbox, with a V8 up front though TBH :p
RE: Nialls GTi6 - Engine going in - floz123 - 01-02-2014
Gay....
RE: Nialls GTi6 - Engine going in - procta - 01-02-2014
(22-01-2014, 09:40 AM)Niall Wrote: Including mapping, 2k but it could of been done cheaper
i wouldn't like to see how much i have spend on mine! to get to where it is now, and i still have jobs to do!
(22-01-2014, 04:12 PM)Midnightclub Wrote: Probably because he wants to get his build right 1st time.. not have to tear it apart again
Its a right lady garden when you just get the car back together and try and iron any faults out, only to have to pull the car back to bits again, to replace the engine again! When that happened to me, i could have weighed the full fuckin lot in! My dad lost all heart too! He wouldn't even look at the car.
Nialls GTi6 - Engine going in - devils_fuel - 01-02-2014
Mucho jealous Niall, this will be awesome due to the constant torque gain through the rev range
RE: Nialls GTi6 - Engine going in - jammapic - 01-02-2014
This will be mega!
RE: Nialls GTi6 - Engine going in - Niall - 02-02-2014
So today was a day to get the bay tidied up and a few little bits done since the engine can't go in until tomorrow.
First and main job was to clean up the rust.
[attachment=13263]
[attachment=13264]
Then get it all painted, and clean everything up
[attachment=13265]
Anddd do the other side
Also, de greased and jet washed the engine bay. It still needs some tidying but I'm not overly fussed as it will only get dirty again!
[attachment=13266]
Got everything bolted on to the engine except the gear box now because i don't have any bolts for my flywheel. Ill be down Peugeot tomorrow at 8:30 to pick those up, get the flywheel and clutch on, box on then drop the engine in by 11 with any chance.
Seeing as we had nothing better to do, we set about getting the IC in correctly. My original plan wasn't going to work as it would of fouled the headlight so i had to change my plan.
[attachment=13267]
[attachment=13268]
Need to get some new silicones which I'm hoping to get tomorrow. Oh and a final pic for today of the epic ride height at the moment
[attachment=13269]
RE: Nialls GTi6 - Engine going in - sam - 02-02-2014
Looking good there buddy, who's going to map it?
RE: Nialls GTi6 - Engine going in - Grant - 02-02-2014
You're welcome
lady garden
RE: Nialls GTi6 - Engine going in - Niall - 02-02-2014
(02-02-2014, 05:32 PM)sam Wrote: Looking good there buddy, who's going to map it?
Track and road in Rainham
(02-02-2014, 05:33 PM)Grant Wrote: You're welcome
lady garden
I haven't got any stupid pictures of you from today to put up!
RE: Nialls GTi6 - Engine going in - Grant - 02-02-2014
Fair
RE: Nialls GTi6 - Engine going in - WiNgNuTz - 02-02-2014
Epic work lads, kinda wish it wasn't such a trek to get up to you, or I'd have come and lent my "stand and look at it/be one the phone/drink tea" skills.
Next time I'm up your way though, I want a go!
pretty pwease? 