+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26)
+--- Forum: Parts (https://www.306oc.co.uk/forum/forumdisplay.php?fid=25)
+--- Thread: 306 HDi Clearout - Few Bits Added 20/06/2017 (/showthread.php?tid=35854)
Pages:
1
2
306 HDi Clearout - Few Bits Added 20/06/2017 - Alan_M - 22-04-2017
I've decided to clear out all my spares for the now crumpled/melted down 306 HDi. I amassed quite a spares collection over the few years I had it, with a mixture of used and new spares for either like-for-like replacement or improvement.
Here you go.....(I have pics of items so ask). Got loads more to go up!
New Pug Bonnet Switch for standard alarm - £10
New Shitroen (Fiat/Alfa/Lancia) Mist Jets - £5
![[Image: 20170620_192442_zpsignabkgy.jpg]](http://i1153.photobucket.com/albums/p501/Alan_M77/20170620_192442_zpsignabkgy.jpg)
Passenger heated/electric wing mirror (Diablo) - £10
![[Image: 20170516_184325_zpsawngclms.jpg]](http://i1153.photobucket.com/albums/p501/Alan_M77/20170516_184325_zpsawngclms.jpg)
Pair of front corner undertray trims (one has a pin broken off) - £5p
Spare wheel screw thing - £3
![[Image: 20170514_194841_zpsia6o5vba.jpg]](http://i1153.photobucket.com/albums/p501/Alan_M77/20170514_194841_zpsia6o5vba.jpg)
2 x Silicon Pipes (both 45' bends, one 51mm both ends - Other 60 to 51mm reducer) & 1 x Ally Pipe 45' bend - £15 all three
![[Image: 20170514_194918_zpsx4afvoyi.jpg]](http://i1153.photobucket.com/albums/p501/Alan_M77/20170514_194918_zpsx4afvoyi.jpg)
3 x A/C Pipes (Front end ones - Condition unknown but did work on mine before removal) - £25
![[Image: 20170514_194743_zpsleqqv6nm.jpg]](http://i1153.photobucket.com/albums/p501/Alan_M77/20170514_194743_zpsleqqv6nm.jpg)
Used HDi Coolant tank/Switch/Cap - £5. £3
Used HDi Alternator (Condition unknown) - £10 £5
New HDi Kengst Fuel Filter - £5 £3
306 HDi Box (Condition unknown - no nasty noises though) - £50 £30 Collection only.
New 306 HDi SKF Shafts (VKJC6992 & 6993, Fit XU Petrols too) - £160 £140 Collection only
New HDi LP pump - £100 £70 £60
![[Image: 20170422_171307_zpsmmtjuqvr.jpg]](http://i1153.photobucket.com/albums/p501/Alan_M77/20170422_171307_zpsmmtjuqvr.jpg)
New HDi Inlet Gasket 0348 N6 (between the elbow and inlet manifold) - £8 £1 each
New TRW JBJ709 BJs (One missing a bolt and washer - hole in bag!) - £20p £15p
![[Image: 20170422_170953_zpsorhpq866.jpg]](http://i1153.photobucket.com/albums/p501/Alan_M77/20170422_170953_zpsorhpq866.jpg)
Front door speaker covers - £5p £3
New HDi turbo inlet gasket - £3
New Contitech HDi Drivebelt - £15 £8 £5
![[Image: 20170422_170625_zpsoch006uv.jpg]](http://i1153.photobucket.com/albums/p501/Alan_M77/20170422_170625_zpsoch006uv.jpg)
Door Mirror Interior Blanks - £5p £3p
New Nissens A/C pump (model 89055) - £100 £80
![[Image: 20170422_165813_zpsmtma8fsk.jpg]](http://i1153.photobucket.com/albums/p501/Alan_M77/20170422_165813_zpsmtma8fsk.jpg)
New B6 Bilstein rear shocks (boxed) - £150 £120
![[Image: IMAG06281_zpsee02bmxl.jpg]](http://i1153.photobucket.com/albums/p501/Alan_M77/IMAG06281_zpsee02bmxl.jpg)
All parts located in Reading, Berkshire.
RE: 306 HDi Clearout - Mix of used and new parts - welshpug - 22-04-2017
what part number is on the B6's please Alan?
RE: 306 HDi Clearout - Mix of used and new parts - Magenta Sunset - 22-04-2017
can you put aside for me these items?
Used HDi LP pump with float - £20
Used HDi HP pump - £20
New HDi Engine Cover fittings - £3
New HDi 1920 7L Fuel Pump Relay (Big Brown One) - £10
Used HDi TPS - £10
New Big and Small EGR blanking plates - £5p
i'm assuming the fuel pumps work ok.
i'll be able to shlep over B/H weekend.
RE: 306 HDi Clearout - Mix of used and new parts - Alan_M - 22-04-2017
(22-04-2017, 07:19 PM)welshpug Wrote: what part number is on the B6's please Alan?
24-020749 or B36-2074.
(22-04-2017, 07:22 PM)Magenta Sunset Wrote: can you put aside for me these items?
Used HDi LP pump with float - £20
Used HDi HP pump - £20
New HDi Engine Cover fittings - £3
New HDi 1920 7L Fuel Pump Relay (Big Brown One) - £10
Used HDi TPS - £10
New Big and Small EGR blanking plates - £5p
i'm assuming the fuel pumps work ok.
i'll be able to shlep over B/H weekend.
Yep, with the undertray. I've never tried the pumps so cannot confirm. Bought them off here some time ago.
RE: 306 HDi Clearout - Mix of used and new parts - Magenta Sunset - 22-04-2017
(22-04-2017, 07:58 PM)Alan_M Wrote:(22-04-2017, 07:19 PM)welshpug Wrote: what part number is on the B6's please Alan?
24-020749 or B36-2074.
(22-04-2017, 07:22 PM)Magenta Sunset Wrote: can you put aside for me these items?
Used HDi LP pump with float - £20
Used HDi HP pump - £20
New HDi Engine Cover fittings - £3
New HDi 1920 7L Fuel Pump Relay (Big Brown One) - £10
Used HDi TPS - £10
New Big and Small EGR blanking plates - £5p
i'm assuming the fuel pumps work ok.
i'll be able to shlep over B/H weekend.
Yep, with the undertray. I've never tried the pumps so cannot confirm. Bought them off here some time ago.
thanks Alan.
RE: 306 HDi Clearout - Mix of used and new parts - Frosty - 23-04-2017
Will the A/C Condenser fit a gti6?
306 HDi Clearout - Mix of used and new parts - bashbarnard - 23-04-2017
I will also be jnterested in the ac condemsor and steering wheel if frosty doesnt have it.
Sent from my iPhone using Tapatalk
RE: 306 HDi Clearout - Mix of used and new parts - Alan_M - 23-04-2017
Condenser is for HDi only. Slight size difference between them.
306 HDi Clearout - Mix of used and new parts - bashbarnard - 23-04-2017
Yaahhh i need a hdi one. Drop me a message please
will get back to you today. Sent from my iPhone using Tapatalk
RE: 306 HDi Clearout - Mix of used and new parts - Chris_90 - 23-04-2017
Any pictures of fmic pipework/the cooler it's self?
RE: 306 HDi Clearout - Some Price Changes - Alan_M - 23-04-2017
I've changed some prices as I found some receipts for parts.
RE: 306 HDi Clearout - Mix of used and new parts - Frosty - 23-04-2017
(23-04-2017, 09:11 AM)Alan_M Wrote: Condenser is for HDi only. Slight size difference between them.
Ah thats me out then. Any idea what the differences are? Also is some of the pipe work different as well then? Just trying to get the bits to put it back on the gti6 i got but im taking the pipe work off HDi's that i have breaking
RE: 306 HDi Clearout - Some Price Changes - ginge191 - 23-04-2017
Prepared to split the IC setup - i'm after 2inch pipework - no an entire setup
RE: 306 HDi Clearout - Mix of used and new parts - Alan_M - 23-04-2017
(23-04-2017, 03:25 PM)Frosty Wrote:(23-04-2017, 09:11 AM)Alan_M Wrote: Condenser is for HDi only. Slight size difference between them.
Ah thats me out then. Any idea what the differences are? Also is some of the pipe work different as well then? Just trying to get the bits to put it back on the gti6 i got but im taking the pipe work off HDi's that i have breaking
HDi one is wider (94321). GTi6 one is 94313. Connections look slightly different too.
http://webshop.nissens.com/GeneratedPDF/569413fa-e3ee-4a5a-a6cc-866293b47cb1/94321.pdf
http://webshop.nissens.com/GeneratedPDF/147f881c-d8dc-4ace-90c7-a3d8380f7ff1/94313.pdf
RE: 306 HDi Clearout - Mix of used and new parts - Frosty - 23-04-2017
(23-04-2017, 03:44 PM)Alan_M Wrote:(23-04-2017, 03:25 PM)Frosty Wrote:(23-04-2017, 09:11 AM)Alan_M Wrote: Condenser is for HDi only. Slight size difference between them.
Ah thats me out then. Any idea what the differences are? Also is some of the pipe work different as well then? Just trying to get the bits to put it back on the gti6 i got but im taking the pipe work off HDi's that i have breaking
HDi one is wider (94321). GTi6 one is 94313. Connections look slightly different too.
http://webshop.nissens.com/GeneratedPDF/569413fa-e3ee-4a5a-a6cc-866293b47cb1/94321.pdf
http://webshop.nissens.com/GeneratedPDF/147f881c-d8dc-4ace-90c7-a3d8380f7ff1/94313.pdf
Ok cheers. Could be interested in the refurbed injectors. Any more info on them? What was replaced when they where refurbed? How long ago where they done?
RE: 306 HDi Clearout - Mix of used and new parts - Alan_M - 23-04-2017
(23-04-2017, 04:00 PM)Frosty Wrote:(23-04-2017, 03:44 PM)Alan_M Wrote:(23-04-2017, 03:25 PM)Frosty Wrote:(23-04-2017, 09:11 AM)Alan_M Wrote: Condenser is for HDi only. Slight size difference between them.
Ah thats me out then. Any idea what the differences are? Also is some of the pipe work different as well then? Just trying to get the bits to put it back on the gti6 i got but im taking the pipe work off HDi's that i have breaking
HDi one is wider (94321). GTi6 one is 94313. Connections look slightly different too.
http://webshop.nissens.com/GeneratedPDF/569413fa-e3ee-4a5a-a6cc-866293b47cb1/94321.pdf
http://webshop.nissens.com/GeneratedPDF/147f881c-d8dc-4ace-90c7-a3d8380f7ff1/94313.pdf
Ok cheers. Could be interested in the refurbed injectors. Any more info on them? What was replaced when they where refurbed? How long ago where they done?
The injectors were refurbed by Diesel Bob. One was rebuilt (seperate bag) and the other three were re-nozzled & balanced. Work was done a while ago, January 2014. Time flies!
RE: 306 HDi Clearout - Some Price Changes - toseland - 26-04-2017
any pics of the gauge pod and gauge?
RE: 306 HDi Clearout - Some Price Changes - Anton - 28-04-2017
Pm'd
RE: 306 HDi Clearout - Some Price Changes - Alan_M - 29-04-2017
(28-04-2017, 05:33 PM)Anton Wrote: Pm'd
Replied.
RE: 306 HDi Clearout - Some Price Changes - Alan_M - 29-04-2017
More bits gone, list edited.
RE: 306 HDi Clearout - Some Price Changes - eskimogod - 01-05-2017
Put me down for second in line for the eco box if anton doesn't have it. And I'll take be pillar pod either way
RE: 306 HDi Clearout - Some Price Changes - Alan_M - 02-05-2017
(01-05-2017, 06:24 PM)eskimogod Wrote: Put me down for second in line for the eco box if anton doesn't have it. And I'll take be pillar pod either way
Ok, I'll let you know by this Friday. Pillar pod is yours.
RE: 306 HDi Clearout - Some Price Changes - Eeyore - 02-05-2017
If sale falls through ill take the pillar pod RGM MRB129
306 HDi Clearout - Some Price Changes - bashbarnard - 04-05-2017
Just to let people know i bought a few bits off alan for the first time. All arrived in very good time and great condition. Top man.
Sent from my iPhone using Tapatalk
RE: 306 HDi Clearout - Some Price Changes - Alan_M - 05-05-2017
(04-05-2017, 10:12 PM)bashbarnard Wrote: Just to let people know i bought a few bits off alan for the first time. All arrived in very good time and great condition. Top man.
Sent from my iPhone using Tapatalk
Thanks Bash.
Got loads more to go up so keep an eye out!
RE: 306 HDi Clearout - Some Price Changes - Midnightclub - 05-05-2017
(04-05-2017, 10:12 PM)bashbarnard Wrote: Just to let people know i bought a few bits off alan for the first time. All arrived in very good time and great condition. Top man.
Sent from my iPhone using Tapatalk
+1 to this!
RE: 306 HDi Clearout - Some Price Changes - Magenta Sunset - 05-05-2017
(05-05-2017, 10:10 AM)Midnightclub Wrote:(04-05-2017, 10:12 PM)bashbarnard Wrote: Just to let people know i bought a few bits off alan for the first time. All arrived in very good time and great condition. Top man.
Sent from my iPhone using Tapatalk
+1 to this!
and again!
RE: 306 HDi Clearout - Some Price Changes - Alan_M - 05-05-2017
Thanks lads and lasses.
RE: 306 HDi Clearout - Some Price Changes - Alan_M - 07-05-2017
(01-05-2017, 06:24 PM)eskimogod Wrote: Put me down for second in line for the eco box if anton doesn't have it. And I'll take be pillar pod either way
Anton has been and gone with box I'm afraid. Pillar pod still here though.
RE: 306 HDi Clearout - Some Price Changes - eskimogod - 08-05-2017
Cool no worries chuck me a pm how you want payment please