+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26)
+--- Forum: Parts (https://www.306oc.co.uk/forum/forumdisplay.php?fid=25)
+--- Thread: FOR SALE: Drivers Vent Gauge Holders (/showthread.php?tid=35753)
Pages:
1
2
Drivers Vent Gauge Holders - Eeyore - 24-03-2017
Hi All,
After almost a year of development finally Im happy with the design of these and can now offer them for sale. These replace the original vent but still allow air to pass through them. These can still be adjusted vertically (if the gauge isnt too heavy) and require no removal of the air ducting (if your gauge isnt too long). Printed in black ABS which is stronger than the usual PLA material.
These are available for £11 posted each in a straight off the printer state but can be sanded and brushed with acetone for a smoother finish. This is a relatively high cost for a 3D printed part as I am trying to cover the cost of the four £40 prototypes I bought before buying my own printer!
Please send payment via PayPal by gift to Samuel.rowell@hotmail.co.uk including your address in the message field. Or pm me!
If you need anything else please let me know.
Drivers Vent Gauge Holders - bashbarnard - 24-03-2017
![[Image: b1d621fc76cb89c499c72d91b3099a60.jpg]](https://uploads.tapatalk-cdn.com/20170324/b1d621fc76cb89c499c72d91b3099a60.jpg)
These are the dogs dangles, the bees knees. Am I overselling this?
These are infact awesome though. Prefect fit, retain the air flow. The only thing i would say is make sure you take the whole vent out first as it makes life 100 times easier.
RE: Drivers Vent Gauge Holders - Mattcheese31 - 24-03-2017
nice idea
RE: Drivers Vent Gauge Holders - 306pc - 24-03-2017
I'll have one please pal.
RE: Drivers Vent Gauge Holders - cully - 25-03-2017
for what size gauge?
RE: Drivers Vent Gauge Holders - Eeyore - 25-03-2017
Standard 52mm
(24-03-2017, 11:49 PM)306pc Wrote: I'll have one please pal.
Give me a pm and I can sort things out.
Sam
RE: Drivers Vent Gauge Holders - Esmyth124 - 27-03-2017
Posted to ni?
RE: Drivers Vent Gauge Holders - Eeyore - 27-03-2017
(27-03-2017, 08:12 AM)Esmyth124 Wrote: Posted to ni?
can do. Ill have to see how much extra it is so if you pay the £12 and are okay to pay whatever extra I find then yeh we can do it like that.
RE: Drivers Vent Gauge Holders - Mattcheese31 - 27-03-2017
postage to northern ireland is the same as mainland UK
RE: Drivers Vent Gauge Holders - Eeyore - 27-03-2017
(27-03-2017, 11:54 AM)Mattcheese31 Wrote: postage to northern ireland is the same as mainland UK
did wonder. Im sure itll be fine then!
RE: Drivers Vent Gauge Holders - Eeyore - 04-04-2017
Bump. These are selling well over facebook. Currently have 5 in stock.
RE: Drivers Vent Gauge Holders - Magenta Sunset - 04-04-2017
(04-04-2017, 10:11 AM)Eeyore Wrote: Bump. These are selling well over facebook. Currently have 5 in stock.
put my name donw for one please
RE: Drivers Vent Gauge Holders - Eeyore - 04-04-2017
Received and posted!
RE: Drivers Vent Gauge Holders - ginge191 - 04-04-2017
Sam, if i send you my existing 205 vents - what's the chance you'd be able to cut and slot these in to hold two 52mm gauges?
RE: Drivers Vent Gauge Holders - Eeyore - 04-04-2017
If you send me them I can try to design 3d printed parts yes but may take a few months!
RE: Drivers Vent Gauge Holders - Magenta Sunset - 06-04-2017
arrived today. nifty!
RE: Drivers Vent Gauge Holders - Eeyore - 06-04-2017
Get a picture up when its fitted! Remember you can sand the face of it down to smooth it out.
RE: Drivers Vent Gauge Holders - Eeyore - 02-05-2017
Bump! One in dum dums car!
![[Image: New%20boost%20gauge%20fitted_zpshrfat50i.jpg]](http://i1184.photobucket.com/albums/z327/srowell3/New%20boost%20gauge%20fitted_zpshrfat50i.jpg)
RE: Drivers Vent Gauge Holders - Magenta Sunset - 03-05-2017
next car session may be next B/H
RE: Drivers Vent Gauge Holders - Chris HDI - 03-05-2017
Just throwing an idea into your head if you haven't already thought of it but what about a similar design but for the centre vents? Maybes not with vertical adjustment of two individually but maybes as one whole unit with two pods spaces?
Love the design of drivers side one, making me think of a gauge to buy just to buy your vent gauge holder but not sure what gauge to buy for a GTi6, oil pressure maybes?
RE: Drivers Vent Gauge Holders - Eeyore - 03-05-2017
So I have thought of that but haven't got round to it. What I do currently have in the works is a 3 gauge pod that fits where the radio goes complete with the surround to fit that space properly. Issue is it takes 6 hours to print!
RE: Drivers Vent Gauge Holders - Chris HDI - 04-05-2017
(03-05-2017, 11:14 PM)Eeyore Wrote: So I have thought of that but haven't got round to it. What I do currently have in the works is a 3 gauge pod that fits where the radio goes complete with the surround to fit that space properly. Issue is it takes 6 hours to print!
Sounds good! Although if like me you use your 306 daily, no music kinda sucks haha
RE: Drivers Vent Gauge Holders - Eeyore - 04-05-2017
(04-05-2017, 12:21 AM)Chris HDI Wrote:(03-05-2017, 11:14 PM)Eeyore Wrote: So I have thought of that but haven't got round to it. What I do currently have in the works is a 3 gauge pod that fits where the radio goes complete with the surround to fit that space properly. Issue is it takes 6 hours to print!
Sounds good! Although if like me you use your 306 daily, no music kinda sucks haha
yeh more for the track car kind of user. You can relocate the radio down to the cd holder area in the lower centre console. the standard loom is long enough.
RE: Drivers Vent Gauge Holders - Mattcheese31 - 04-05-2017
(03-05-2017, 11:14 PM)Eeyore Wrote: So I have thought of that but haven't got round to it. What I do currently have in the works is a 3 gauge pod that fits where the radio goes complete with the surround to fit that space properly. Issue is it takes 6 hours to print!
wouldn't bother mate, you can buy three gauge, single din units as it is for a tenner off ebay
mine here
RE: Drivers Vent Gauge Holders - Eeyore - 04-05-2017
yeh so puglove for example has one but wants something more custom and oem looking. Each to their own.
RE: Drivers Vent Gauge Holders - Mattcheese31 - 04-05-2017
(04-05-2017, 10:58 AM)Eeyore Wrote: yeh so puglove for example has one but wants something more custom and oem looking. Each to their own.
yeah just giving you the heads up mate, if you want to do it fair play, just wanted to make sure you knew they were available in some form
RE: Drivers Vent Gauge Holders - fatlapit - 04-05-2017
(02-05-2017, 09:47 PM)Do all that great work then put the guage in on the piss. Eeyore Wrote: Bump! One in dum dums car!
RE: Drivers Vent Gauge Holders - Magenta Sunset - 04-05-2017
(04-05-2017, 11:11 AM)fatlapit Wrote:(02-05-2017, 09:47 PM)Do all that great work then put the guage in on the piss. Eeyore Wrote: Bump! One in dum dums car!
they used to do that back iin the '60's. when F1 cars were still analog
RE: Drivers Vent Gauge Holders - Welshy_Pete - 06-05-2017
Ive got 3 original gauges from a audi quattro turbo 20v 1980s.
This just reminded me that I've got these from years ago.
RE: Drivers Vent Gauge Holders - Eeyore - 25-07-2017
Bump. ive got three of these ready to go!