![]() |
Rpm sensor xud11 - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16) +--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11) +--- Thread: Rpm sensor xud11 (/showthread.php?tid=35488) |
Rpm sensor xud11 - Sambo the bodger - 17-01-2017 Okie dokie so sinse I've done a but of hunting in the bath earlier and came up short I need to know I remember reading a thread about dropping the in a 306 in standard form...and it said about drilling the block for the RPM sensor? Any comments welcome but if anyone could shed some light on the whole situation that would he much obliged I probably looked in the wrong places as I'm new to the forum but any info would be muchly appreciatedĀ Sambo RE: Rpm sensor xud11 - Piggy - 18-01-2017 As I said when I messaged you... Its in the racetractor thread early on and there is a guide to fitting the xud11 in the guides section, also in there ![]() RE: Rpm sensor xud11 - Sambo the bodger - 19-01-2017 (18-01-2017, 07:21 AM)Piggy Wrote: As I said when I messaged you... Its in the racetractor thread early on and there is a guide to fitting the xud11 in the guides section, also in there Yeaa piggyy can't find that forum. RE: Rpm sensor xud11 - Piggy - 19-01-2017 Well you are already on the forum... Admittedly admin need to add the xud11 guide in the guides section...but it is marked as a top thread right at the top of the xud section! And my Racetractor thread is under my threads! C'mon Sambo!! |