Cummins 6BT in an RX8 - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: General (https://www.306oc.co.uk/forum/forumdisplay.php?fid=6) +--- Forum: The Couch (https://www.306oc.co.uk/forum/forumdisplay.php?fid=7) +--- Thread: Cummins 6BT in an RX8 (/showthread.php?tid=35122) |
Cummins 6BT in an RX8 - Dum-Dum - 02-11-2016 No words needed, as titled. http://www.engineswapdepot.com/?p=12516 RE: Cummins 6BT in an RX8 - Eeyore - 02-11-2016 amazeballs liked on fb and will follow RE: Cummins 6BT in an RX8 - bigcheez2k3 - 02-11-2016 Following on Insta now! RE: Cummins 6BT in an RX8 - vincenthoulihan92 - 01-12-2016 Hello If ye are interested here is the full build (well so far..) of the rx-hate on our Youtube page BodgeRidesGarage. (https://www.youtube.com/channel/UCI0x77KlCWId6rLXKPF1OVQ) Hope ye like it RE: Cummins 6BT in an RX8 - BashRacing - 04-12-2016 Thats a great conversion, bet it's super low geared though RE: Cummins 6BT in an RX8 - ginge191 - 04-12-2016 Been watching this progress, love it! RE: Cummins 6BT in an RX8 - johnnygomez - 04-12-2016 awesome lol ... RE: Cummins 6BT in an RX8 - welshpug - 04-12-2016 hmm, 122kg fully dressed to 450 kg, without considering the weight of the gearbox, and down by 80 bhp at least/ RE: Cummins 6BT in an RX8 - BashRacing - 04-12-2016 (04-12-2016, 10:28 PM)welshpug Wrote: hmm, 122kg fully dressed to 450 kg, without considering the weight of the gearbox, and down by 80 bhp at least/ I think 'jus cos different' rather than an out and out performance conversion RE: Cummins 6BT in an RX8 - JTaylor2005 - 04-12-2016 Could have been worse. They could have been putting it in an RX7. I guess they were just aiming for the total opposite of what it already had. High rev, low torque, light weight to low rev, high torque, and ultra heavy weight haha. RE: Cummins 6BT in an RX8 - Dum-Dum - 05-12-2016 (04-12-2016, 10:28 PM)welshpug Wrote: hmm, 122kg fully dressed to 450 kg, without considering the weight of the gearbox, and down by 80 bhp at least/ It won't be down for 80bhp for long though, they have already started bolting on a bigger turbo and although it might be 80bhp down but it's about 200lb/ft up. They were doing burnouts in 5th which tends to need some grunt or some ridiculous gearing. Looks like they were talking about suspension set up in the video and they have moved alot of stuff further back not that it'll compensate for the 400kg difference alone. RE: Cummins 6BT in an RX8 - hotrodjacko - 05-12-2016 (04-12-2016, 10:47 PM)BashRacing Wrote: I think 'jus cos different' rather than an out and out performance conversion This. "BecauseF***You" and a massive middle finger to everybody, love it. RE: Cummins 6BT in an RX8 - welshpug - 05-12-2016 dont get me wrong i think its great to see silly engines in small cars, but an m57d30 would have been a better bet. RE: Cummins 6BT in an RX8 - Midnightclub - 05-12-2016 ^^ Probably substantially more expensive to tune though.. would more than likely need a custom ECU for starters, then mapping costs, turbo's etc.. it has been done before though, saw one in an old ford estate i think it was RE: Cummins 6BT in an RX8 - welshpug - 05-12-2016 no aftermarket ecu needed, they'll run on the standard one fine, very easy to tune, 500Nm and 200+ bhp on a mild map. get a newer one and they're more complex but you can get 286 bhp stock. MINI use one in their ALL4 DAKAR racer, WITH a 38mm inlet restrictor it runs 320 bhp and 800 Nm. RE: Cummins 6BT in an RX8 - darrenjlobb - 05-12-2016 (05-12-2016, 10:03 AM)welshpug Wrote: dont get me wrong i think its great to see silly engines in small cars, but an m57d30 would have been a better bet. I think you are just epically failing to see the point.... Its a RX8....with a 12v cummins in it.....With thousands of people following the build with interest...... Think point makes itself really. |