WANTED: XUD 2.1 Fuel Filter Housing - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26) +--- Forum: Misc & Wanted (https://www.306oc.co.uk/forum/forumdisplay.php?fid=14) +--- Thread: WANTED: XUD 2.1 Fuel Filter Housing (/showthread.php?tid=35027) |
WANTED: XUD 2.1 Fuel Filter Housing - ally406 - 19-10-2016 As above, looking for a fuel filter housing from an XUD 2.1. RE: WANTED: XUD 2.1 Fuel Filter Housing - bashbarnard - 19-10-2016 (19-10-2016, 07:47 PM)ally406 Wrote: As above, looking for a fuel filter housing from an XUD 2.1. the plastic housing you mean? the 1.9 one fits on perfectly if you need one its just a little smaller. if that helps at all RE: WANTED: XUD 2.1 Fuel Filter Housing - Piggy - 19-10-2016 I MAY have one...unlikely though.. Mind, as above...its same as xud9 and same filter. RE: WANTED: XUD 2.1 Fuel Filter Housing - bashbarnard - 19-10-2016 (19-10-2016, 08:21 PM)Piggy Wrote: I MAY have one...unlikely though.. well its not the same. the 2.1 one is taller but the 1.9 one will fit perfect. RE: WANTED: XUD 2.1 Fuel Filter Housing - Piggy - 19-10-2016 I found them to be the same filter? The housing is taller...but filter same RE: WANTED: XUD 2.1 Fuel Filter Housing - bashbarnard - 19-10-2016 (19-10-2016, 08:33 PM)Piggy Wrote: I found them to be the same filter? ive never actually checked that lol/ could be right for all i know RE: WANTED: XUD 2.1 Fuel Filter Housing - ally406 - 19-10-2016 2.1 filter should be 88mm tall versus 60mm for 1.9. Later model 2.1's might have used a 60mm filter but would like the 88mm housing please |