+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: General (https://www.306oc.co.uk/forum/forumdisplay.php?fid=6)
+--- Forum: Newbies (https://www.306oc.co.uk/forum/forumdisplay.php?fid=24)
+--- Thread: Newbie with zx volcane td (/showthread.php?tid=34534)
Newbie with zx volcane td - Danhrc - 15-07-2016
Hi all just joined the site as many guides and people with lots of know how ect
Quick run down
Got a volcane 3dr had one years ago and well why not save one as never see them any more
Was in a bit of a state when a got her bodywork tired few dents very dirty interior and clutch slipping
But only 3 owners loads of history so went 330miles to get it
So far i have done
New 3 part vaelo clutch kit
New ball joints
New clutch cable and clip
New hand brake cables
Service
Oil pressure switch
Wet vac the whole inside
Got my mates body shop to paint pritty much most of it removing scuffs on bumpers dent ect (only tailgate and drivers door not done) spoiler and roof trims re done in satin black and the red stripes i have re done with red also
Still have a list to do but think she looks alright for 22 and 177k
![[Image: 20160603_194201_zpsy6chqatd.jpg]](http://s1243.photobucket.com/user/Danhrc/media/Mobile%20Uploads/20160603_194201_zpsy6chqatd.jpg.html)
Thank you for reading cheers dan
Still need some parts ect for it but more on that later
Newbie with zx volcane td - bashbarnard - 16-07-2016
(15-07-2016, 09:39 PM)Danhrc Wrote: Hi all just joined the site as many guides and people with lots of know how ect
Quick run down
Got a volcane 3dr had one years ago and well why not save one as never see them any more
Was in a bit of a state when a got her bodywork tired few dents very dirty interior and clutch slipping
But only 3 owners loads of history so went 330miles to get it
So far i have done
New 3 part vaelo clutch kit
New ball joints
New clutch cable and clip
New hand brake cables
Service
Oil pressure switch
Wet vac the whole inside
Got my mates body shop to paint pritty much most of it removing scuffs on bumpers dent ect (only tailgate and drivers door not done) spoiler and roof trims re done in satin black and the red stripes i have re done with red also
Still have a list to do but think she looks alright for 22 and 177k
Thank you for reading cheers dan
Still need some parts ect for it but more on that later
Welcome along, there are a lot of people to help on here if you ever neee anything we are a big comminity and all frindly. Nice looking motor that. Do love a zx. Where abouts do you live
RE: Newbie with zx volcane td - Piggy - 16-07-2016
Tideeee!
Has that trim missing that is so common on those... Would do my ocd in!
I too love a good ZX like this
I had ZX before 30six
RE: Newbie with zx volcane td - Danhrc - 16-07-2016
Thanks for comments its a nice car last had one 12yr ago and always wanted another they dont ofteb come up for sale well mk1s so when this did had to get it gets used every day not many problems to sort out to be fair and do you mean the tow eye cover it does drive me mad every time i look at it but no one seams to have one lol
Also from newcastle upon tyne
I need to find some one local to do lower my rear beam if any one can do it or know were i can with out costing a fortue one garage said 300 i would have ago my self.but only get 1 day off and have the little one lol
Cheers dan
RE: Newbie with zx volcane td - Piggy - 16-07-2016
To replace or lower?
RE: Newbie with zx volcane td - Danhrc - 16-07-2016
To lower it mate not many people want to do work on it as they can be a mere
Newbie with zx volcane td - bashbarnard - 16-07-2016
Theyre not that bad. Id offer my services but im suffolk
Newbie with zx volcane td - zx_volcane - 16-07-2016
Lovely stuff, what did you do to refresh the red trim?
Some of mine has gone brittle.
Shame I'm not nearer otherwise would of offered a hand with the axle
RE: Newbie with zx volcane td - Danhrc - 16-07-2016
Lol ate a dont think it be 2 bad ad have a go me self but am limited with time off so would rather get some one who has done it before there must be some one local that can do it may be some one or here or that knows some 1 local to me
Thank you for your offer just a bit far for both of us lol
The red trim was just faded so look led for new ones but if u find them they are a fortune so used red vinyl looks good need to take tem off and as some of the trims have chips out duno how then re do
Handy being a ex spray painter can do a lot my self but many frinds have body shops lol
RE: Newbie with zx volcane td - WiNgNuTz - 16-07-2016
Welcome along, very tidy looking motor you've got there, I'm actually quite jealous!
RE: Newbie with zx volcane td - Danhrc - 16-07-2016
Thank you for your comments is there a place where i can place a question ie do i just put it in the xud section as have a quick one to ask
RE: Newbie with zx volcane td - Danny Wideboy - 16-07-2016
XUD section if it's engine related, otherwise, start a project thread in the other Marques section.
RE: Newbie with zx volcane td - 7057sam - 16-07-2016
Looks great
Hello and welcome along
RE: Newbie with zx volcane td - zx_volcane - 16-07-2016
vinyl, great idea
RE: Newbie with zx volcane td - WiNgNuTz - 16-07-2016
(16-07-2016, 11:14 AM)Danny Wideboy Wrote: XUD section if it's engine related, otherwise, start a project thread in the other Marques section.
This pretty much. There are other technical sections as well, so choose the one that you think suits your query the best, if you get it wrong, there are always mods on hand to move it to a more appropriate section for you. Just look for anyone with a pink name (like mine).
RE: Newbie with zx volcane td - Danhrc - 16-07-2016
Thanks for all the answers and comments altho if i had just looked around would of saved the daft questions was at graft at time i will start a project post also
Team zx do you have ot know the best place to find volcane parts cheers dan
Newbie with zx volcane td - zx_volcane - 17-07-2016
(16-07-2016, 11:13 PM)Danhrc Wrote: Thanks for all the answers and comments altho if i had just looked around would of saved the daft questions was at graft at time i will start a project post also
Team zx do you have ot know the best place to find volcane parts cheers dan
Which parts you after, lot of stuff is stupidly rare these days, just have to keep an eye out
RE: Newbie with zx volcane td - Danhrc - 17-07-2016
Hello i am after a tow eye cover for f bumper
Some window rubbers(ones that go left to right if that makes sence) for f doors as mine arnt that good
Central locking fob and the box that is next to hand brake
In i ideal world some f seats as have a bit wear and are faded abit but may put gti leather and alcantara in a duno yet sorry for the list are you the man for parts lol
RE: Newbie with zx volcane td - Matt-Rallye - 29-07-2016
I cant promise anything but i might have a tow eye cover in silver in the shed from my old volcane.. i remember removing it before i weighed it in!