+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26)
+--- Forum: Misc & Wanted (https://www.306oc.co.uk/forum/forumdisplay.php?fid=14)
+--- Thread: WANTED: espace/laguna splitter (/showthread.php?tid=3433)
WANTED: espace/laguna splitter - Louis123 - 13-05-2012
Hi as title says I'm after a espace/laguna splitter to fit a 306 phase 3 front bumper
Cheers,
Louis123
Re: WANTED: espace/laguna splitter - Louis123 - 15-05-2012
How do you fit these to a 306 cause there obviously to big to fit a 306 do you just cut the edges off the espace/laguna splitter?
Re: WANTED: espace/laguna splitter - Eeyore - 15-05-2012
Louis123 Wrote:How do you fit these to a 306 cause there obviously to big to fit a 306 do you just cut the edges off the espace/laguna splitter?
you fit it by drilling holes up into the bumper and the nut and bolt it all on around the edge. One every foot or so wil make sure it deffo stays on. The edges you can cut with a dremel or a junior hacksaw once its fitted!
Re: WANTED: espace/laguna splitter - Louis123 - 15-05-2012
Sweet cheers bud so I can just buy one of a Laguna or espace and cut it myself
Re: WANTED: espace/laguna splitter - 4WayDiablo - 15-05-2012
Do you want vented or unvented? Where you from?
Re: WANTED: espace/laguna splitter - 4WayDiablo - 15-05-2012
Ah Derbyshire. Too far lol was gunna say i have a vented one I could be tempted to sell
Re: WANTED: espace/laguna splitter - CJ_Derv - 16-05-2012
screwdriver under the corner on an espace and then rip it like you would a wax strip off ya mrs
but all of this in a scrap yard of course as they only stapled on, then bolt on or self tappers job done
Re: WANTED: espace/laguna splitter - Louis123 - 16-05-2012
Yeah vented one
and cheers cj will have a scout around