![]() |
Ellow - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: General (https://www.306oc.co.uk/forum/forumdisplay.php?fid=6) +--- Forum: Newbies (https://www.306oc.co.uk/forum/forumdisplay.php?fid=24) +--- Thread: Ellow (/showthread.php?tid=3407) |
Ellow - Miggers - 11-05-2012 Just found this grand forum 'ere for us 306 jockies. Mine's a '99 Ph.3 Hdi in Moonstone with 182,000 on the clock, F/F Morettes(crap things)de-cat,de-EGR and a colour coded tailgate spoiler(Ooohhh). It's looking a tad poorly at the mo,I managed to tag the back end of a Freelander a couple of weeks back(still driveable though),bent the bonnet,bust the grille and put a superb hole straight through the bumper, bending the a/c condenser,busting the fan shroud,adding a nice dent to the slam panel vertical and giving the rad a slight leak,bollox. Got all the shiny bits and a new(secondhand)rad though so with a bit of hammer work on the slam panel's vertical and repair to the fan shroud it should be back to it's shiny best. Re: Ellow - Toby - 11-05-2012 Welcome to the forum ![]() Sounds like a fair bit of work to do, hopefully it all goes to plan ![]() Re: Ellow - Eeyore - 11-05-2012 piiiiccctttuuuuureeesss! and welcome! ![]() Re: Ellow - samass - 12-05-2012 sounds like a fun weekend, hammers and cars! ![]() Re: Ellow - 4WayDiablo - 12-05-2012 Welcome along! Ellow - Matt - 12-05-2012 Welcome along bud! Re: Ellow - kingy - 12-05-2012 welcome mate, have a look in the for sale section, i think their are loads of stuff like bumpers and bonnets going cheap at the minute. Re: Ellow - Niall - 12-05-2012 Welcome For the sake of 20 quid for a pattern slam panel, I would buy one. Speaking from experience they are nigh on impossible to straighten out and get at the right angle again so everything lines up! Fitting a me wine to mine was a bitch though. Had to get people pushing the inner wings in so that the holes lined up ![]() Re: Ellow - Grant - 12-05-2012 Welcome along mate. Sounds like your well on the way to being an avid 306 sado like the test of us lol. You've come to a good place here. Great community full of fun and laughs! Enjoy! Re: Ellow - Kimmie - 12-05-2012 Welcome ![]() Re: Ellow - Miggers - 12-05-2012 Here's some pics of the "Landy Rash" Re: Ellow - kingy - 12-05-2012 oh bad one. remindes me of when i picked on a lamp post in the snow. horrible aint it. Re: Ellow - Miggers - 12-05-2012 kingy Wrote:oh bad one. remindes me of when i picked on a lamp post in the snow. horrible aint it. I swore a bit I tell ye!!!. Guess I am a 306 saddo,I've had Pugs for 20 years now(2 405's first), had an XUD DTub before this one and I've had this for 8 years. It wasn't 4 years old when I paid 6k for it with 90k on the clock. I keep saying I'd like a new motor(BM 320d looks favorite when I do the deed), but I just can't bring myself to part with the Pug,it still brings a silly grin on when you boot it hard. Re: Ellow - 4WayDiablo - 12-05-2012 Its only cosmetics really. Bummer yes but new bonnet and bumper and will be sweeet Do like the morettes :-) Re: Ellow - Grant - 12-05-2012 ^^this! Dont often see a ph3 with morrettes, think that looks quit tidy. New bumper bonnet and slam pannel (about £150 topps from scrappy) and your back to good news mate. Re: Ellow - kingy - 12-05-2012 youve had pugs for 20 years. that makes you at least the same age as me. :dance: not many oldens on here matey. ![]() Re: Ellow - Miggers - 12-05-2012 kingy Wrote:youve had pugs for 20 years. that makes you at least the same age as me. :dance: Makes me 52 Re: Ellow - kingy - 13-05-2012 haha, mint. you going to fcs? Re: Ellow - Miggers - 13-05-2012 'Ere we go,the route to nice and shiney again. The slam panel is very slightly off(I'll get a new 'un on it eventually),but the rad was a real mare to do. The bottom 'ose didn't want to come out at all and the lad almost buggered the bayonety type fitting up but pulled off a superb recovery with some PTFE and racy sealant before re-fitting it all back in(he works in the water industry actually). Re: Ellow - kingy - 13-05-2012 looks better, see ye had the help of ya mate. looks good from the pics. top work matey. Re: Ellow - Miggers - 13-05-2012 No1 son actually matey.He loves fiddling with cars,he's at that age(28)you see. Yeah,the old thing does look alright again. Just hope it passes it's MOT Friday on H/L alignment. My tester mate will no doubt be giving it the old "failed then passed,repaired on site"routine to keep his figures up to scratch for the Min.Men. Re: Ellow - kingy - 13-05-2012 ![]() Re: Ellow - MarkTD - 13-05-2012 Nice 306 looks good with morettes as well. Re: Ellow - Miggers - 13-05-2012 kingy Wrote: He wants a backhander 'round the 'earhole ![]() He buggered up the inner lights a couple of years ago. If you've had Morettes you'll know how cack the bulb holders are on the inners, well the entire inners really :x . Anyway,it went to matey for it's annual and when he's checking the lights. "You got the left inner out there Miggs,turn 'em off a sec" he shouts and pulls the bulb holder out ![]() "Turn 'em back on",I turn on the lights and pull the stalk for main beam, something goes "BANG" ![]() My man says"Don't worry,you got mainbeam on the outers" :dance: shouts matey. They've never worked since,I remind him about it at every MOT test!!! |