![]() |
IS200 coolant boiling - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: Other Marques (https://www.306oc.co.uk/forum/forumdisplay.php?fid=38) +--- Forum: Technical (https://www.306oc.co.uk/forum/forumdisplay.php?fid=40) +--- Thread: IS200 coolant boiling (/showthread.php?tid=33975) |
IS200 coolant boiling - doski - 02-05-2016 pretty stumped so thats why im resorting to asking for help from the 306 forum ![]() picked up an IS200 yesterday and everything seemed fine goes, stops and no rattles. after driving 100 miles home the coolant was boiling in the reservoir. I took the cap of the rad and it was just water in there I filled it up with antifreeze but still the coolant boils like a kettle after a long drive. theres no oil/coolant mix anywhere, the heaters blow very hot, the thermostat opens and fans come on. Ive stook some cardboard under the car to see if I can find a leak but its gone through 1 litre of coolant in around 2 hours. very slight steam from exhaust but I compared it to my friends '12 plate focus and his was exactly the same (just cold outside) RE: IS200 coolant boiling - welshpug - 02-05-2016 common for the head to crack on these, they don't often mix fluids. edit, thought you said L200 ![]() start with a new cap, boiling point is significantly higher under pressure. RE: IS200 coolant boiling - doski - 02-05-2016 (02-05-2016, 12:24 PM)welshpug Wrote: common for the head to crack on these, they don't often mix fluids. thats my thoughts mate ![]() the rad looks a little cruddy now so maybe ill get a new one there only £60 (not sure if that comes with a new cap though? RE: IS200 coolant boiling - C2K - 02-05-2016 Rad cap would be my first port of call too. RE: IS200 coolant boiling - Choppin - 02-05-2016 Another for rad cap, my brothers Lexus did the same thing but was faulty cap and a thermostat RE: IS200 coolant boiling - doski - 03-05-2016 Left some card under it this morning. The rad has a few stones in it at the very bottom and coolant was dripping so I've ripped it out just to wait 4 days now for the new one |