306oc - Peugeot 306 Owners Club & Forum
Cam sensing with vernier pulleys - Printable Version

+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XU Petrol Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=17)
+--- Thread: Cam sensing with vernier pulleys (/showthread.php?tid=33760)



Cam sensing with vernier pulleys - sian's creepy friend - 12-04-2016

This gti6 engine I have, has 285 cams in it. But it runs standard pulleys and management atm. But it doesn't run right atm. And I need to investigate this issue.
Long story short. I plan to put some vernier pulleys on but pipers are listed as not having a pickup for cam sensor. So wandered what other people had ran in the same situation. xx


RE: Cam sensing with vernier pulleys - Ruan - 12-04-2016

They'll be on aftermarket management I'd highly suspect.

The stock pulleys *are* vernier anyway.


RE: Cam sensing with vernier pulleys - welshpug - 12-04-2016

quite unlikely it has 285's unless it has different pistons, even the hydraulic profile 285h's are marginally borderline on stock unskimmed head.


RE: Cam sensing with vernier pulleys - sian's creepy friend - 12-04-2016

It's got 285s. And about 2k worth of other bits invoiced too. And I have the old boxes with the standard cams in. Welsh pug I'll pm you the invoices tonight to see. I've spoken to you before actually on rr. I have a 309 3dr good wood. ?