+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Interior, Exterior, ICE (https://www.306oc.co.uk/forum/forumdisplay.php?fid=12)
+--- Thread: Stereo Voltage Issue (/showthread.php?tid=33477)
Stereo Voltage Issue - tonycox_design - 11-03-2016
Any help here would be great!
Admittedly I have a XUD ZX but the wiring is very similar if not the same!
Trying to get my aftermarket head unit to work, 12v all the way to the point where I plug the adapter into the back of the stereo, then dropped to 3v.
I don't get it at all! Tried to plug the OEM stereo back in and the alarm LED flashes but it will not power on! I have no idea what I've done here! Never had a problem like this before!
RE: Stereo Voltage Issue - powerandtorque - 11-03-2016
A bad wiring connection will typically show 12v and then drop off to nothing once there's some load applied.
RE: Stereo Voltage Issue - tonycox_design - 11-03-2016
I reckon I've broken a wire IMO. I did jam the headunit into place before testing it. Urgh, looks like I'll be chopping wires up :S