+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20)
+--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3)
+--- Thread: Project 16v #theLEMOAN (/showthread.php?tid=33471)
RE: Project 16v #LEMON - Piggy - 15-11-2016
Project lemon 1-1 Piggy
Scored one for the Pig side this weekend...ordered this...
Was the result of a careful cross ref search of part numbers. The end result was amazon prime coming up trumps...next day delivery and a Marelli condenser at 10% of the usual price
(thats not 10% off...thats 10% of what it should be, ie 90% off!. And with amazong primus, got free next day pNp)
RE: Project 16v #LEMON - Eeyore - 15-11-2016
hope its exactly the same then! D:
RE: Project 16v #LEMON - Piggy - 15-11-2016
(15-11-2016, 05:27 PM)Eeyore Wrote: hope its exactly the same then! D:
Yup. perfect fit. Identical to the one removed.
RE: Project 16v #LEMON - welshpug - 15-11-2016
I'd hope not, or it wont work :p
RE: Project 16v #LEMON - Piggy - 15-11-2016
(15-11-2016, 08:12 PM)welshpug Wrote: I'd hope not, or it wont work :p
Indeed. very very true. original most unfit for purpose!
To keep things on track and just, well, because, look at it!
Techy bits:
BE4 hdi gearbox. Std diff. No monies for lsd.
Gti6 flywheel. Helix autosport 6 paddle sprung clutch/pressure plate for xud fitment.
Thus xud fork/aem etc with new bushes.
RE: Project 16v #LEMON - mr_fish - 16-11-2016
(15-11-2016, 08:34 PM)Piggy Wrote: Techy bits:
BE4 hdi gearbox. Std diff. No monies for lsd.
Gti6 flywheel. Helix autosport 6 paddle sprung clutch/pressure plate for xud fitment.
Thus xud fork/aem etc with new bushes.
looking very tidy. as dum dum said...just like it come out of the box.
Didn't know you were going BE4 as well.
RE: Project 16v #LEMON - Piggy - 16-11-2016
Be4...removed from a 306hdi. Duno why it was there...but seemed to be original to me
My fail peeps. Read be4 on bell housing. But says be3 on the official bit.
RE: Project 16v #LEMON - welshpug - 16-11-2016
late 306 boxes were a mix of be3 and be4, mostly minor internal differences.
RE: Project 16v #LEMON - darrenjlobb - 16-11-2016
Thats a BE3?
RE: Project 16v #LEMON - Frosty - 16-11-2016
How much was the condenser if you don't mind me asking? I'm thinking about putting air con back on the Gti6 and it's missing the condenser to start with.
RE: Project 16v #LEMON - Piggy - 16-11-2016
(16-11-2016, 01:28 PM)Frosty Wrote: How much was the condenser if you don't mind me asking? I'm thinking about putting air con back on the Gti6 and it's missing the condenser to start with.
£13.51. inc next day delivery
(16-11-2016, 01:09 PM)darrenjlobb Wrote: Thats a BE3?
It has BE4 and BE3 stamped on it
So... I have deduced that it is indeed, a gearbox.
RE: Project 16v #LEMON - welshpug - 16-11-2016
much like most gti6 boxes, they are a mix of BE3 and BE4, BE3R.
guess its going in at 30 degrees now you have decided on a 306 casing.
RE: Project 16v #LEMON - darrenjlobb - 16-11-2016
Ah, its basically a BE3 then, its in a BE3 style casing anyway....Probs has some parts bin BE4 bits inside. Will need to go in at 30 degrees with that box, but will make fitting much easier with stock mounts at top etc. Basically drop in like mine did in its MTDI form.
RE: Project 16v #LEMON - Dum-Dum - 17-11-2016
Is it just the photo or is the inlet of the PAS pump bent to the point where it's gonna be a big restriction?
RE: Project 16v #LEMON - Piggy - 17-11-2016
(17-11-2016, 09:38 AM)Dum-Dum Wrote: Is it just the photo or is the inlet of the PAS pump bent to the point where it's gonna be a big restriction?
A few have said that...but thats standard... I DO think it always looks bent though. like an after thought for pug
RE: Project 16v #LEMON - Piggy - 19-11-2016
Friend lent me his industrial carpet cleaner for the day....so got busy on the "never smoked in" interior
And the water JUST from the rooflining:
And here is what was found...can you picture the previous owner?...
All seats/mats cleaned too. just the plastics to scalp back.
RE: Project 16v #LEMON - Dum-Dum - 19-11-2016
This image just describes the last owner of your car. An electrician (or farmer) who smokes, likes a drink, has a slight addiction to energy drinks, partial to a late night mcdonalds or 2 but is looking to change his lifestyle by taking up jogging or going to the gym.
Also either has a female child or takes the piss out of adult male friends on their birthdays.
RE: Project 16v #LEMON - welshpug - 19-11-2016
thats not a 306 towing eye either
RE: Project 16v #LEMON - Matt-Rallye - 19-11-2016
"Never smoked in"
Fag packet under the seats
RE: Project 16v #LEMON - Piggy - 20-11-2016
(19-11-2016, 10:05 PM)Matt-Rallye Wrote: "Never smoked in"
Fag packet under the seats
Yeah. Ash tray full too... and can you see the roof lining...I could have scraped it to make chewing tobacco I swear
RE: Project 16v #LEMON - Piggy - 20-11-2016
So. Dial gauge arrived. Tomorrow: time it up. Belt it up. Bolt rest of bits on. See how far I get. Weather looks naff so maybe a successful day in shed!
RE: Project 16v #LEMON - Piggy - 21-11-2016
https://youtu.be/Z_f9xTA3qAU
RE: Project 16v #LEMON - Piggy - 29-11-2016
Timed this up FINALLY today. Took ruddy forever to get round to this...keep planning to doing one or two things on this...then something comes up! Grr.
Few bits on the engine and then can hang it in the car.
Did same on crank pulley... good ref points in future if issues occur. Saves pulling an injector.
RE: Project 16v #LEMON - allye - 29-11-2016
What's the end game with this then? Keeping the interior so a quick road car? Perfect chance to sound insulate it with the interior out?
RE: Project 16v #LEMON - Piggy - 29-11-2016
(29-11-2016, 05:48 PM)allye Wrote: What's the end game with this then? Keeping the interior so a quick road car? Perfect chance to sound insulate it with the interior out?
Nice quick road car. Something to jam on track once in a while too. I realised I never used the racetractor like I initially intended. So I need a stereo, AC and sound deadening more often that the -150kg.
My ultimate goal is STILL 200bhp/ton.
RE: Project 16v #LEMON - Piggy - 04-12-2016
https://youtu.be/pea10_J0kBY
next episode...the lemon shell will be under inspection
RE: Project 16v #LEMON - Dum-Dum - 04-12-2016
Can't wait for the next episode then.
RE: Project 16v #LEMON - Piggy - 08-12-2016
Now rolling on 406rims with winters on...
And to answer, once and for all, the big question...can you fit 4 wheels under the bonnet...
It is now dubbed.. The lemoan. Its kind of a lemon and I kind of moan about it a lot....
https://youtu.be/J-1Cw1FOdQo
RE: Project 16v #LEMON - HDi--Power - 08-12-2016
That is rough as rough can be, id still be wanting my money back....
Project 16v #LEMON - zx_volcane - 08-12-2016
Wants dropping on the front
Sent from my iPhone using Tapatalk Pro
Haven't watched the video, but is it you moaning for 15mins?
Sent from my iPhone using Tapatalk Pro