+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20)
+--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3)
+--- Thread: Project 16v #theLEMOAN (/showthread.php?tid=33471)
Project 16v #theLEMOAN - Piggy - 10-03-2016
Time to be moving on with technology....
So for some time I have been trying to get on with a new engine for a new project...
Back last Autumn I went and got an engine....and it was heavy and made a RIGHT mess...
Heres the first episode... I promise the lighting and recording should(!) get better with time!
https://youtu.be/F_T4GKURfdw
RE: Project more valves.... - ginge191 - 10-03-2016
Id love thee videos of there was a bit more... Erm.. Progress?
No offence, but I just watched the whole thing and ended it with 4 injectors removed and an understanding you're not sure what the project will be?
Episode 2; more progress PLEASE
RE: Project more valves.... - twangy - 10-03-2016
fair play piggy , will interested to see how you get on with this , when your broken trotters fixed off course
RE: Project more valves.... - Piggy - 10-03-2016
(10-03-2016, 06:33 PM)ginge191 Wrote: Id love thee videos of there was a bit more... Erm.. Progress?
No offence, but I just watched the whole thing and ended it with 4 injectors removed and an understanding you're not sure what the project will be?
Episode 2; more progress PLEASE
Yeah I know man...
More of an info/intro to the new project...
There will be more to come with more progress in each one
Lots of win parts
RE: Project more valves.... - ozonehostile - 10-03-2016
Still the wrong fuel :p
RE: Project more valves.... - Piggy - 10-03-2016
(10-03-2016, 09:00 PM)ozonehostile Wrote: Still the wrong fuel :p
No, I double checked... It's fine... It runs on dirty derv not pathetic petrol
RE: Project more valves.... - Eeyore - 10-03-2016
i also watched... you owe me 6 minutes of my life. x
RE: Project more valves.... - Piggy - 11-03-2016
(10-03-2016, 11:41 PM)Eeyore Wrote: i also watched... you owe me 6 minutes of my life. x
If you don't already realise how poor my videos are by now..
Sure it was still better than being a sailor boy for 6min
RE: Project more valves.... - Dum-Dum - 11-03-2016
(10-03-2016, 06:33 PM)ginge191 Wrote: No offence, but I just watched the whole thing and ended it with 4 injectors removed and an understanding you're not sure what the project will be?
That is big progress on one of these, it took me about 4 months to get the injectors out of the 2.2 I had.
RE: Project more valves.... - ozonehostile - 11-03-2016
(11-03-2016, 11:15 AM)Dum-Dum Wrote:(10-03-2016, 06:33 PM)ginge191 Wrote: No offence, but I just watched the whole thing and ended it with 4 injectors removed and an understanding you're not sure what the project will be?
That is big progress on one of these, it took me about 4 months to get the injectors out of the 2.2 I had.
I must've been very lucky with changing the injectors in mine then haha
RE: Project more valves.... - welshpug - 11-03-2016
less capacity more valves? how much does that beasty weigh?
going mechanical or ecu?
RE: Project more valves.... - Piggy - 11-03-2016
(11-03-2016, 11:15 AM)Dum-Dum Wrote:(10-03-2016, 06:33 PM)ginge191 Wrote: No offence, but I just watched the whole thing and ended it with 4 injectors removed and an understanding you're not sure what the project will be?
That is big progress on one of these, it took me about 4 months to get the injectors out of the 2.2 I had.
Is kind of how I felt.
The engine sat there on the stand for about a month coz I just kept putting it off!
(11-03-2016, 02:23 PM)welshpug Wrote: less capacity more valves? how much does that beasty weigh?
going mechanical or ecu?
Initially was going to be 2.2 so heavier than even thr 2.1 due to the 2.2 having balancer shafts!
But with the 8v block it shouldnt be too bad!
Fuel system will come later...
RE: Project more valves.... - welshpug - 11-03-2016
if the balancer shafts are like the EW12 then its very easy to get rid of them.
RE: Project more valves.... - Piggy - 11-03-2016
Yeah then its custom mounts and making a gearbox fit as the 8v hdi gearbox doesnt bolt on.
RE: Project more valves.... - welshpug - 11-03-2016
meh, just use the ml6c.
RE: Project more valves.... - Ruan - 11-03-2016
Or just bang the head on a 2.0 bottom end with 2.0 16v RHW pistons (which I reckon may not even be required as valve reliefs were removed on later engines - need someone to measure..) and be done?? That way everything just bolts together..
The extra 180cc just isn't worth it imho for the hassle.
RE: Project more valves.... - Piggy - 14-03-2016
Hopefully found some very good second hand bearings for this and a good price on rings...
Just need to sort a headset and things can make a move on...
Ironically all the shiney parts are in place... Yet lack the normal bits needed to fit it all together!
RE: Project more valves.... - mr_fish - 15-03-2016
GSF stock VR Headgaskets and Headsets, make use of the 40% off they have most weekends (it would seem) and you can save a bit.
RE: Project more valves.... - Piggy - 15-03-2016
Got HG...
Need a headset. Will look into those 40% offers!
RE: Project more valves.... - 205dtub - 15-03-2016
Lashing a set of ARP's into this? Does the 16v head not suffer badly from valve float at high boost/rpm
RE: Project more valves.... - welshpug - 15-03-2016
shoudlnt need to unless he's trying to slap some silly boost into it, its much more efficient than an 8v so will makegood power with less pressure.
RE: Project more valves.... - Piggy - 15-03-2016
(15-03-2016, 06:13 PM)welshpug Wrote: shoudlnt need to unless he's trying to slap some silly boost into it, its much more efficient than an 8v so will makegood power with less pressure.
This.
Darren suffered with it...but lets be honest... We know he likes the boost.
Parts updates will come with the videos soon.
RE: Project more valves.... - Piggy - 18-03-2016
https://youtu.be/VCkDrxZ0QPE
RE: Project 16v - Piggy - 25-03-2016
some epic parts have arrived.... turbo is being sent to company for balancing after rebuild... general seals/gaskets etc here too... things starting to take shape...
Last video to catch up I think...
https://youtu.be/ZOg_TvWqNfc
RE: Project 16v - cully - 25-03-2016
Put some pictures up with your thead you may inspire interest!
ive given up watching videos
RE: Project 16v - Piggy - 25-03-2016
(25-03-2016, 06:17 PM)cully Wrote: Put some pictures up with your thead you may inspire interest!
ive given up watching videos
K
Just for cully
Video stuff wont be along for a couple weeks... But 8v block stripped down, cleaned and painted it today. Well first coat. Crank just to come out then honing the bores.
RE: Project 16v - Piggy - 08-04-2016
Lacking pics I guess but...
https://youtu.be/McluZ7Xiyko
About up to date now.
Couple other projects on the go and now trying to make up for 6 weeks not earning/working.
So please be patient :-)
RE: Project 16v - allye - 10-04-2016
I agree, I'd be more interested with pictures and a good write up over a video.
RE: Project 16v - Paul_13 - 10-04-2016
Agreed
RE: Project 16v - doski - 10-04-2016
polish the sump
