306oc - Peugeot 306 Owners Club & Forum
Presentation 306 Rallye (Brazil) - Printable Version

+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: General (https://www.306oc.co.uk/forum/forumdisplay.php?fid=6)
+--- Forum: Newbies (https://www.306oc.co.uk/forum/forumdisplay.php?fid=24)
+--- Thread: Presentation 306 Rallye (Brazil) (/showthread.php?tid=30797)

Presentation 306 Rallye (Brazil) - Dollores - 09-06-2015

hello,


I'm from Brazil and would like to participate in the Forum.
I have a 306 Rallye 1999 already with some modifications.

I would like to present the project at all.

Sorry my bad English.

Here is a picture of my 306.

[Image: 20150125_195142?async&rand=0.796091728528082][Image: 20150403_171735?async&rand=0.43133968298511604]

RE: Presentation 306 Rallye (Brazil) - Mattcheese31 - 09-06-2015

Welcome to the madhouse, I'll bet there isn't many Rallyes over your way Smile

RE: Presentation 306 Rallye (Brazil) - Dum-Dum - 09-06-2015

Hello and welcome.
I didn't realise they made the rallye in any other country other than the UK.

RE: Presentation 306 Rallye (Brazil) - Dollores - 09-06-2015

Thanks,

In fact we have several Rallye in Brazil.
However the engine of Rallye here in Brazil is not the dreamed XURS 2.0 16V.
In Brazil the Rallye came with the 1.8 16V engine XU7.

So do full swap for the 2.0 16V or a partial swap using some XURS parts in XU7.

If allowed, I would like to open a topic in the project sector to show the modifications we chose to do in XU7.

But most of the 306 in Brazil are already in precarious state.

306 Brazil's best preserved are on 306BR forum that I participate.

RE: Presentation 306 Rallye (Brazil) - Dum-Dum - 09-06-2015

Some people here would think the 2.8 was the engine we should of had in theRallye. not me though, I like 167bhp Smile

Oh and if you are planning on keeping the 1.8 look at SRowell's project 1.8, it runs ITBs and Jenveys.

RE: Presentation 306 Rallye (Brazil) - Dollores - 09-06-2015

Yes, I will keep 1.8

Today it is already with the 306 GTI (2.0 16V 167bhp) exhaust manifold.

I also have already installed the Camshafts the 306 GTI (2.0 16V 167bhp)

I'm using an air filter K & N inbox.

RE: Presentation 306 Rallye (Brazil) - Dum-Dum - 09-06-2015

XU10J4RS (167bhp) inlet manifold is also a VERY good upgrade. I have one I'd sell but the postage would be extortionate.

RE: Presentation 306 Rallye (Brazil) - Niall - 09-06-2015

Welcome Smile Car looks great!
In my opinion, the 1.8 is the engine the rallye should have! If you want more power out of it, the ECU is the weak link. It doesn't adapt to change very well. I would put it on aftermarket management and then add your camshaft, add GTi manifolds (inlet and exhaust) and open up the inlet ports in the head. Should see A LOT more power that way

RE: Presentation 306 Rallye (Brazil) - Dollores - 09-06-2015

I think I was not clear.

I already have installed the exhaust manifold XU10J4RS.

I bought mine in UK.

In Brazil they sold the Xsara VTS with XU10J4RS.

I bought the Camshafts of a VTS.

RE: Presentation 306 Rallye (Brazil) - Ben_w - 09-06-2015

I think Dum Dum was trying to say you need to add the inlet manifold from the XU10J4RS as well!

RE: Presentation 306 Rallye (Brazil) - Dum-Dum - 09-06-2015

I think we are loosing something in translation somewhere here. Which manifold did you fit (in English top picture is Inlet and bottom picture is Exhaust). Both will add BHP.

[attachment=23707]
[attachment=23706]

RE: Presentation 306 Rallye (Brazil) - Dollores - 09-06-2015

(09-06-2015, 08:03 PM)Dum-Dum Wrote: I think we are loosing something in translation somewhere here. Which manifold did you fit (in English top picture is Inlet and bottom picture is Exhaust). Both will add BHP.

Yeah, sorry my english. Blush
Here the picture of what was installed in my car.

[Image: IMG-20150609-WA0078?async&rand=0.6353153595323382]

Also installed the camshafts of XU10J4RS.

I imagine that with these changes the car has a 140 BHP.

RE: Presentation 306 Rallye (Brazil) - Fooby - 09-06-2015

Welcome to the forum! Glad to see another Rallye from so far away.

Please feel free to provide any information you can within a project thread for your car Smile

RE: Presentation 306 Rallye (Brazil) - 7057sam - 10-06-2015

Hello and welcome along Smile

RE: Presentation 306 Rallye (Brazil) - Eeyore - 10-06-2015

welcome to the forum. Yes check out my project thread! Interesting to know they came with the 1.8 outside of the UK!

RE: Presentation 306 Rallye (Brazil) - 7057sam - 10-06-2015

(10-06-2015, 09:00 AM)Eeyore Wrote: welcome to the forum. Yes check out my project thread! Interesting to know they came with the 1.8 outside of the UK!

Maybe you should do a America's spec'd rallye sam lol 

RE: Presentation 306 Rallye (Brazil) - Dollores - 10-06-2015

Thank you all for the welcome.

I put the my project information in the specific area.

I Hope I'm not doing anything wrong.

RE: Presentation 306 Rallye (Brazil) - Herby7 - 11-06-2015

Welcome Cool

Looks in great condition .

RE: Presentation 306 Rallye (Brazil) - Dollores - 12-06-2015

(11-06-2015, 09:30 PM)Herby7 Wrote: Welcome Cool

Looks in great condition .
Thank you!

RE: Presentation 306 Rallye (Brazil) - Matt-Rallye - 12-06-2015

Hello and welcome Smile

Very nice looking rallye you have! Also interesting that is it 1.8 not 2.0 Smile Please start a project thread