306oc - Peugeot 306 Owners Club & Forum
Brembos, discs and pads - Printable Version

+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26)
+--- Forum: Parts (https://www.306oc.co.uk/forum/forumdisplay.php?fid=25)
+--- Thread: Brembos, discs and pads (/showthread.php?tid=3072)

Brembos, discs and pads - Grant - 28-04-2012

Bought these off dum dum a little while back, but can't get them under my wheels without spacing them about 60mm, and I'm not choping my wheels in lol.

Fiat coupe Brembos. Will not bolt straight onto 306 struts, but mounts can be made to suit. There is a good guide on the '6 forum.
Come with discs and Mintex pads.
£100 collected, or can bring to ace or any meets I am going to be at.

[Image: 2f616c74.jpg]

[Image: 8cddba94.jpg]

Also got gti6 steering wheel in good condition, £10 collected

'6 exhaust manifold £10 collected

Brembos, discs and pads - Matt - 28-04-2012

Dibs on steering wheel. Any pics? Is it leather?

Re: Brembos, discs and pads - mark_airey - 28-04-2012

Matt Wrote:Dibs on steering wheel. Any pics? Is it leather?

Bastard..............how did I miss that! lol It will be leather if its a GTi one though matt Sad

Re: Brembos, discs and pads - kingy - 28-04-2012

should have taken mine off my coupe when i had it. sold it for stupid money and wish i would of either kept it or broke it.

Brembos, discs and pads - Matt - 28-04-2012

mark_airey Wrote:
Matt Wrote:Dibs on steering wheel. Any pics? Is it leather?

Bastard..............how did I miss that! lol It will be leather if its a GTi one though matt Sad

Haha you had all the other stuff lol. Sweet well I'll take it, either at ace or FCS Smile

Re: Brembos, discs and pads - Grant - 28-04-2012

Cool Matt, ill be at ace on the 21st... Can give them to you there?


Brembos still for sale, £100

Re: Brembos, discs and pads - Chris - 28-04-2012

What width discs do they take? And how far from the outside of where the disc would sit to the edge of the caliper?
Need to see if they would fit behind my wheels as its tight with the standard calipers on the 302's

Re: Brembos, discs and pads - Grant - 29-04-2012

Chris Wrote:What width discs do they take? And how far from the outside of where the disc would sit to the edge of the caliper?
Need to see if they would fit behind my wheels as its tight with the standard calipers on the 302's


They should fit behind yours ok. I could squeeze them behind my clones, if spaced stupidly. Yours are 17s???

Either way ill have a measure up for you in a bit as to the disk thickness.

With regards to the caliper placement, you can have the caliper touching the outside of the disc before it hits the centre of the disc (if that makes sense), and you are going to have mounts made, so you have a bit of flexibility there as to where the caliper sits (within reason obviously)...


Apologies if none of that made sense, but i makes sense in my head! lol

Re: Brembos, discs and pads - Chris - 29-04-2012

I'll not be running the 17's I've some splits in 16s and they need like 3mm spacers witht he standard 302mm calipers with new pads.
The distance I need is from where the outside face of the disc would sit to the outside edge of the caliper nearest the spokes as that's were my clerance would be tight. Not from the radius of the disc to the barrel of the wheel.