FOR SALE: GTb2056VLK - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26) +--- Forum: Parts (https://www.306oc.co.uk/forum/forumdisplay.php?fid=25) +--- Thread: FOR SALE: GTb2056VLK (/showthread.php?tid=30697) |
GTb2056VLK - Piggy - 02-06-2015 Garrett GTB2056VLK Originally from a XC90 D5 Volvo. Has been run on my 2.1 for about 4k miles and made well over 200bhp on a basic tune on a RR. Stonking turbo for a great price. Flanges are easy to make and gaskets available on ebay for a decent price Good condition. £150 posted £140 collect at FCS [attachment=23546] [attachment=23547] RE: GTb2056VLK - Piggy - 04-06-2015 any interest? RE: GTb2056VLK - 306pc - 04-06-2015 Too complex I'm guessing for most of us. RE: GTb2056VLK - bashbarnard - 04-06-2015 Id have this in a heartbeat just no monies for months now really hope it goes to someone that does it justice RE: GTb2056VLK - dashmader - 04-06-2015 Can you post more pics?? Is it vacuum controlled?? I need more pics to see if I can fit this on my 306 with the 16v head RE: GTb2056VLK - Piggy - 05-06-2015 (04-06-2015, 10:22 PM)dashmader Wrote: Can you post more pics?? Is it vacuum controlled?? I need more pics to see if I can fit this on my 306 with the 16v head it's controlled however you decide to What pics do you need and I will take them for you RE: GTb2056VLK - dashmader - 05-06-2015 I need to see the oil intake in relation to the exaust intake. Also the vnt rod in relation to the oil and exaust intake. This is to see if I can put the turbo on the back of the engine,like the orginal one is put RE: GTb2056VLK - Piggy - 05-06-2015 You can clock it all 360degrees bud RE: GTb2056VLK - Spoonaltap - 06-06-2015 So how would I go about fitting this turbo to my xud which is pretty much standard at the minute? RE: GTb2056VLK - Piggy - 06-06-2015 (06-06-2015, 01:00 AM)Spoonaltap Wrote: So how would I go about fitting this turbo to my xud which is pretty much standard at the minute? welder bolts. research. RE: GTb2056VLK - Piggy - 14-06-2015 bump (05-06-2015, 04:24 PM)dashmader Wrote: I need to see the oil intake in relation to the exaust intake. Also the vnt rod in relation to the oil and exaust intake. This is to see if I can put the turbo on the back of the engine,like the orginal one is put both hot and cold sides will rotate 360degrees so I am quite sure she would squeeze down the back RE: GTb2056VLK - dashmader - 15-06-2015 Can you give a price on postage to azores/Portugal RE: GTb2056VLK - Piggy - 15-06-2015 (15-06-2015, 07:17 AM)dashmader Wrote: Can you give a price on postage to azores/Portugal yeah sure I will find one later RE: GTb2056VLK - dashmader - 15-06-2015 Ok thanks. I will try this one. This is controlled by vacuum right RE: GTb2056VLK - Piggy - 15-06-2015 (15-06-2015, 07:24 AM)dashmader Wrote: Ok thanks. I will try this one. This is controlled by vacuum right or boost can or electronic, whichever you choose to use. I fitted a vac can and am using arduino RE: GTb2056VLK - dashmader - 15-06-2015 Ok. On my 306 I am using ecu controlled vacuum. So vaccum is the right way to go for me. But boost isn't bad too RE: GTb2056VLK - Piggy - 19-06-2015 weekend bumpoid |