+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: General (https://www.306oc.co.uk/forum/forumdisplay.php?fid=6)
+--- Forum: The Couch (https://www.306oc.co.uk/forum/forumdisplay.php?fid=7)
+--- Thread: Phase 1 front fog alternatives (/showthread.php?tid=3058)
Phase 1 front fog alternatives - ginge191 - 27-04-2012
As titled, i've been looking around for a while and struggling to find any alternative.
Basically, i'll be obtaining a front bumpber off Chris (hopefully) and i dont want/use front fog lights.
As with the phase 3, you can get rallye blanks, is there anything for a phase 1?
Perhaps a type of brake vent? - in all honesty, i'm thinking on one side to get some duct and running it up to the turbo intake, but again, i dont just want the foglight to be blank, some sort of shroud.
Anyone for any ideas?
Re: Phase 1 front fog alternatives - bigcheez2k3 - 27-04-2012
2 Cold air feeds? 1 to the filter/turbo, other to intercooler?
Re: Phase 1 front fog alternatives - Dan! - 27-04-2012
S1 106 rallye blanks may fit, as I think the fog lights for S1 106's are the same for 205's, Phase 1 306's etc.
![[Image: 247824_10150275472131180_509016179_87595...4362_n.jpg]](http://i1230.photobucket.com/albums/ee498/m1dkn1ghtrunn3r5/progress/247824_10150275472131180_509016179_8759523_7234362_n.jpg)
![[Image: img1035areseb6.jpg]](http://imageshack.us/photo/my-images/167/img1035areseb6.jpg/)
![[Image: rallyepic1vx2.jpg]](http://imageshack.us/photo/my-images/362/rallyepic1vx2.jpg/)
Re: Phase 1 front fog alternatives - 4WayDiablo - 27-04-2012
Cibie made some ph1 fog covers if anyone can find a pic
Re: Phase 1 front fog alternatives - samass - 27-04-2012
get on the fibreglass and make some custom jobbies?
Re: Phase 1 front fog alternatives - 4WayDiablo - 27-04-2012
Found this. The ones I was thinking of is white with black writing though
![[Image: Angel5_sized.jpg]](http://i8.photobucket.com/albums/a2/Fastloon/Other/Angel5_sized.jpg)
Edit:
![[Image: Ellington084.jpg]](http://i735.photobucket.com/albums/ww352/daviewonder/Ellington084.jpg)
Re: Phase 1 front fog alternatives - 306carter - 27-04-2012
+1 for rallye blanks. Although there around £90 new. You can get from a 106 slalom (base spec) normally found lurking in scrap yards.
Re: Phase 1 front fog alternatives - lewisdmz - 27-04-2012
yellow front fogs would look awesome on a p1 imo
Re: Phase 1 front fog alternatives - ginge191 - 27-04-2012
Not a fan of the blanks imo, i like a smooth look, and those 106 blanks look uber retro for my likings.
I could fibreglass something i suppose, but i like the idea of the cold air feeds.
Re: Phase 1 front fog alternatives - Dan! - 27-04-2012
A smooth look on a phase 1?!
Not gonna happen - they have the same front end as David Coulthard.
Phase 1 front fog alternatives - Jonny b - 27-04-2012
Demon tweeks sell them Cibie covers I have em in mine!! About 25 delivered iirc
Re: Phase 1 front fog alternatives - Bananalad - 27-04-2012
I have the grills taken out of my front bumper and im nearly tempted to not put them back in it looks real nice imo
Re: Phase 1 front fog alternatives - ginge191 - 27-04-2012
Dan! Wrote:A smooth look on a phase 1?!
Not gonna happen - they have the same front end as David Coulthard.
not necessarily smoothed, as in euro'd, but a more of a vent than anything..
like this
![[Image: a-fog-lamp2.bmp]](http://www.driversdomainuk.com/img/a-fog-lamp2.bmp)
where can i get these?!
edit: or even this http://www.ebay.co.uk/itm/MG-ROVER-AIR- ... 2316cca0ee and custom it?
Re: Phase 1 front fog alternatives - samass - 27-04-2012
'bay? tweeks? race supply sites? oorrr diy
Re: Phase 1 front fog alternatives - Chris - 27-04-2012
http://www.ecosse-peugeot.co.uk/show_pr ... 64&appid=4
Re: Phase 1 front fog alternatives - ginge191 - 27-04-2012
photo coming soon
Re: Phase 1 front fog alternatives - samass - 27-04-2012
72 quid!!
hock:
Re: Phase 1 front fog alternatives - Chris - 27-04-2012
They used to have photos, They fit like the covers but with a center like the pic of the 205 you posted.
Same as these
http://www.ecosse-peugeot.co.uk/show_pr ... 50&appid=4
![[Image: ss3_f.jpg]](http://www.ecosse-peugeot.co.uk/images/products/306/ss3_f.jpg)
Re: Phase 1 front fog alternatives - ginge191 - 27-04-2012
See, i quite like the look of them - give them a coat of matt black to merge with the bumper, could look nice!
Chris, I'm in portsmouth for the next 3 weeks, if you want/need rid of that bumper soon - i can collect from there at any point.
Any more suggestions to what to put in the space? mesh? grill?
Re: Phase 1 front fog alternatives - Jenkosowls - 27-04-2012
![[Image: c4a75d95.jpg]](http://i382.photobucket.com/albums/oo261/pug306lx/c4a75d95.jpg)
Re: Phase 1 front fog alternatives - Snoopy2005uk - 27-04-2012
Its all about the yellow fogs
![[Image: DSC_0022.jpg]](http://i127.photobucket.com/albums/p157/Snoopy2005uk/MFN%202%2010%2011/DSC_0022.jpg)
Re: Phase 1 front fog alternatives - mark_airey - 27-04-2012
Whats with all the pics of fog lights? he said already that he want an alternative as he wants to remove them, thats the point of the thread isn't it?
Re: Phase 1 front fog alternatives - ginge191 - 28-04-2012
Well done mark, your pedantic mind come into use and picked up the point of the conversation!
Re: Phase 1 front fog alternatives - 4WayDiablo - 28-04-2012
Ginge.. what about some yellow tinted fogs? Could go well :-P
Re: Phase 1 front fog alternatives - ginge191 - 28-04-2012
No, I don't like the fogs, I'd like an alternative, hence the title
Re: Phase 1 front fog alternatives - samass - 28-04-2012
boobies. stick some of those stress boobies in there
Re: Phase 1 front fog alternatives - Craig-o - 29-04-2012
Get two of those oblong Sponebob Squarepants demister pads and stick those in
Re: Phase 1 front fog alternatives - ginge191 - 29-04-2012
Craig-o Wrote:Get two of those oblong Sponebob Squarepants demister pads and stick those in
...about as attractive as yellow fogs