16" steelies?? - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22) +--- Forum: Suspension, Transmission, Handling & Braking (https://www.306oc.co.uk/forum/forumdisplay.php?fid=19) +--- Thread: 16" steelies?? (/showthread.php?tid=3051) |
16" steelies?? - Joe - 26-04-2012 does anyone know of any 16" 4x108 steelies? was the laguna fitted with them??????? 16" steelies?? - Matt - 26-04-2012 Mondeo are 16" Re: 16" steelies?? - kingy - 26-04-2012 406 Re: 16" steelies?? - 1616six - 26-04-2012 Laguna isnt 4x108 joe you should know that! Re: 16" steelies?? - Dan! - 26-04-2012 You'l be looking at probably mondeo/focus, or newer pugs for 16's (207, 307 etc...) Re: 16" steelies?? - Rippthrough - 26-04-2012 I've got some Re: 16" steelies?? - Jenkosowls - 26-04-2012 Rippthrough Wrote:I've got some Multi fits too lmao! No problems! Re: 16" steelies?? - Rippthrough - 26-04-2012 Variable offset too! Re: 16" steelies?? - Joe - 27-04-2012 right mk2 mondeo's arent 16" steelies but mk3 are but there 5 stud aint they? i just cant even seem to find anything on ebay :/ Re: 16" steelies?? - kingy - 27-04-2012 as i said before. 406 steelies are 16" and will go on no problem. £10 each from the scrappies. tish''''' Re: 16" steelies?? - Joe - 27-04-2012 really??? my missus mum had 14" alloys on it and that was a hdi? they were like mini nimrods 16" steelies?? - Matt - 27-04-2012 Mondeo are 16" are 4 stud, I park next to one near enough every day. Lol Re: 16" steelies?? - Ruan - 27-04-2012 But completely the wrong offset, you'd need 20mm spacers to get them anywhere near close. 16" steelies?? - Matt - 27-04-2012 There is that, but op says nothing about running spacers or not Re: 16" steelies?? - Ruan - 27-04-2012 And 406 steelies are 15s usually... Re: 16" steelies?? - me-tm - 27-04-2012 Ruan Wrote:And 406 steelies are 15s usually... I can't believe anybody said this sooner! I was under the impression they were 15s... oh wait, even if you look at them in the scrappy, the tyres on them say 15. :crazy: Re: 16" steelies?? - Rippthrough - 27-04-2012 There's some C5's on 16 steelies, they use them as spares over in france for the rallying. That and the 607/C6 5-studs. Re: 16" steelies?? - Chris - 27-04-2012 406 steels are availble in 16 there et20 so bolt on too, but good luck finding a used set. There are also some 308 ones, but the et is around 34ish. Re: 16" steelies?? - Dum-Dum - 28-04-2012 207, 308 and the X00X series cars use 4 stud 16" steels too. |