Wanted: SUPER URGENT: 1.8 Heater Matrix Pipe - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26) +--- Forum: Misc & Wanted (https://www.306oc.co.uk/forum/forumdisplay.php?fid=14) +--- Thread: Wanted: SUPER URGENT: 1.8 Heater Matrix Pipe (/showthread.php?tid=30431) |
SUPER URGENT: 1.8 Heater Matrix Pipe - Eeyore - 11-05-2015 Hi All, Replacing the heater matrix on the 1.8 and pulled a bit too hard and snapped the plastic end bit. Amazingly the next tug and it came off fine... So im looking for a 1.8 or xsi or (perhaps gti although ive heard there are differences) heater matrix pipe. What have you got? Should look like this. Although this is a gti one and seems to have an extra bit of pipe on the plastic bit... Sam RE: SUPER URGENT: 1.8 Heater Matrix Pipe - welshpug - 11-05-2015 if you have a gti manifold you do need the gti pipework as it sits higher up the bulkhead however the routing in the engine bay is a little different IIRC RE: SUPER URGENT: 1.8 Heater Matrix Pipe - Eeyore - 11-05-2015 (11-05-2015, 07:37 PM)welshpug Wrote: if you have a gti manifold you do need the gti pipework as it sits higher up the bulkhead however the routing in the engine bay is a little different IIRC Ah so I have a standard 1.8 manifold however I will be fitting the GTI6 Manifold shortly so I need the gti6 one dont i? RE: SUPER URGENT: 1.8 Heater Matrix Pipe - Eeyore - 11-05-2015 Should have this sorted now as Im going to see Carl Chambers tomorrow. |