+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20)
+--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3)
+--- Thread: darrenjlobb's Adaptronic Managed Compound Blown Derv Bus Build (/showthread.php?tid=29433)
RE: darrenjlobb's Compound Blown Derv Bus - 2015 Resurrection / New Build - Dum-Dum - 07-06-2015
(05-06-2015, 06:16 PM)darrenjlobb Wrote: Thank you very much, I know the little photo contest is totally off topic, however to pull it back on, it has certainly inspired me to crack on and deal with it as soon as I can, so there should be some updates coming soon hopefully!
Thats awesome news, cant wait to see the updates.
I've voted again, would love to see you top ten. Had a look at the top photos and alot of the ones after you are cute birds who are always gonna get lots of likes, the 2 ahead of you appear to be the same family as all the tractors and people in the background are the same.
RE: darrenjlobb's Compound Blown Derv Bus - 2015 Resurrection / New Build - Matt - 07-06-2015
You can vote more than once?! Christ I'll vote everyday. You definatley deserve it, much better that the guy who painted his lawnmower... Haha
When's the beast getting an epic engine? Or did I miss the update
RE: darrenjlobb's Compound Blown Derv Bus - 2015 Resurrection / New Build - darrenjlobb - 07-06-2015
It will get an engine soon, I just need to shift this cummins out of the workshop! Ideally finishing it before then!
RE: darrenjlobb's Compound Blown Derv Bus - 2015 Resurrection / New Build - darrenjlobb - 21-06-2015
Well in anticipation of getting this bus in the 'shop soon I had a spare afternoon today so decided to clear the car out this afternoon...As with most things parked up for so long, it quickly becomes a storage container of parts from not only itself, but all the other "projects in progress"...
So after a few hours of sorting stuff out, hoovering it out, and just generally sorting it out, I was left with a car back in roughly the same shape it was when I laid it up 3-4 years ago!
![[Image: wl69ccYlFHX2b_YjxfXWAQR7ybiwxEiz3RqgkWEO...8-h1101-no]](https://lh3.googleusercontent.com/wl69ccYlFHX2b_YjxfXWAQR7ybiwxEiz3RqgkWEOXnmV=w1468-h1101-no)
![[Image: wK9CuujnkP4KkW24eQYNxyYom1Ryqz6iSp0cfe7M...8-h1101-no]](https://lh3.googleusercontent.com/wK9CuujnkP4KkW24eQYNxyYom1Ryqz6iSp0cfe7M6-qi=w1468-h1101-no)
Also after many hours spent farcing / messing about with steels / tyres / banding, I am rather fed up with them, and have pretty much decided to sack them off in favour for something else, made of alloy! But not really sure what at the moment, so if anyone can help / throw some ideas out there id most appreciate it, want to keeps its general stance, and need to keep fairly wide, although can obviously be spaced out a bit if needed, but just not feeling the steels, and fed up with the lack of anyone being able to do a decent job of it!
RE: darrenjlobb's Compound Blown Derv Bus - 2015 Resurrection / New Build - WiNgNuTz - 21-06-2015
Shame really, the banded steels would have looked pretty epic on the finished product, shame they were so royally screwed! You gonna stick with the JD yellow idea though?
RE: darrenjlobb's Compound Blown Derv Bus - 2015 Resurrection / New Build - Stef205 - 21-06-2015
Something like pro race 3's or mo5's thick spokes fairly wide would still look good in yellow!
RE: darrenjlobb's Compound Blown Derv Bus - 2015 Resurrection / New Build - dr_jekyll - 21-06-2015
Land rover modulars with pcd re-drill [WINKING FACE]
RE: darrenjlobb's Compound Blown Derv Bus - 2015 Resurrection / New Build - darrenjlobb - 21-06-2015
Yes going to need to stay yellow, I know its a bit marmite, but I love it, and its all in the nature of the project / where its bread from!!
RE: darrenjlobb's Compound Blown Derv Bus - 2015 Resurrection / New Build - WiNgNuTz - 21-06-2015
I love marmite!
RE: darrenjlobb's Compound Blown Derv Bus - 2015 Resurrection / New Build - Piggy - 22-06-2015
I love marmite too!
I am not a fan of banded steels either, but it does look good on them. bet they heavy too.
mo5s in yellow would look epic imho. But thats only me.
just KEEP them yellow whatever you do
RE: darrenjlobb's Compound Blown Derv Bus - 2015 Resurrection / New Build - dr_jekyll - 22-06-2015
C5 alloys?
RE: darrenjlobb's Compound Blown Derv Bus - 2015 Resurrection / New Build - Piggy - 22-06-2015
(22-06-2015, 07:54 AM)dr_jekyll Wrote: C5 alloys?
too narrow. too small.
RE: darrenjlobb's Compound Blown Derv Bus - 2015 Resurrection / New Build - dr_jekyll - 22-06-2015
(22-06-2015, 09:36 AM)Piggy Wrote:Alloy banding? But spose ut takes them straight back to the original problem(22-06-2015, 07:54 AM)dr_jekyll Wrote: C5 alloys?
too narrow. too small.
RE: darrenjlobb's Compound Blown Derv Bus - 2015 Resurrection / New Build - Piggy - 22-06-2015
(22-06-2015, 09:38 AM)dr_jekyll Wrote:(22-06-2015, 09:36 AM)Piggy Wrote:Alloy banding? But spose ut takes them straight back to the original problem(22-06-2015, 07:54 AM)dr_jekyll Wrote: C5 alloys?
too narrow. too small.
Darren will correct me if wrong, but I'm sure his current wheels are 16" if not 17"
15" be lost i tink. Plus same issue with banding, plus be a crime to cut up a lightweight c5, if its even possible due to the metal properties of one of them!
RE: darrenjlobb's Compound Blown Derv Bus - 2015 Resurrection / New Build - dr_jekyll - 22-06-2015
16" i think....
RE: darrenjlobb's Compound Blown Derv Bus - 2015 Resurrection / New Build - darrenjlobb - 22-06-2015
Current steels are 16", looking to stay 16" if possible, 8-8.5J, altho spacing can be an option anyway...
The problem I have is an obsession with naughty super lows / stance, and also the need to drive the ballsack out of my car, two things that basically just dont go well together, so more a compromise is needed, but the problem I often find is alot of wheels look amazing when decked, but soon as you raise it just the bit enough to be able to drive a car hard, it looks silly.
I had a set of TH lines once, with the car on its bum it looks incredible, but would simply not have been drivable static like this...And as much as I want to love the steels, there just a nightmare for getting to run inline, stopping from rusting, and just generally a mincefest!
-3sdm's?
-Cozzy wheels?
-Keep it simple and resort back to some stock peugeot wheels like 205 speedlines / challengers like I used to have?
Would like to try and get the thing in the workshop in a few weeks time as other projects are drawing to a close, and first project is the rear beam etc, so wheels needed!
RE: darrenjlobb's Compound Blown Derv Bus - 2015 Resurrection / New Build - bashbarnard - 22-06-2015
I don't think the speedlines are the way to go. Challengers would probably suit being yellow though Imo.
RE: darrenjlobb's Compound Blown Derv Bus - 2015 Resurrection / New Build - dr_jekyll - 22-06-2015
Needs dish in my opinion. Even a set off bbs rep dare rs with a yellow center a polished barrel
RE: darrenjlobb's Compound Blown Derv Bus - 2015 Resurrection / New Build - Paul_13 - 22-06-2015
Sl434s! Wider than c5's steelloys
RE: darrenjlobb's Compound Blown Derv Bus - 2015 Resurrection / New Build - 306Dan - 22-06-2015
M05's or sl434's both would look awesome on this
RE: darrenjlobb's Compound Blown Derv Bus - 2015 Resurrection / New Build - Dum-Dum - 22-06-2015
16" 406 steels and suitable spacers, they are Et18 standard anyway.
Oh and I recognise those brackets on the big methanol tank, glad they are still working well.
RE: darrenjlobb's Compound Blown Derv Bus - 2015 Resurrection / New Build - Seb_Ryan - 22-06-2015
Escos wheels!
RE: darrenjlobb's Compound Blown Derv Bus - 2015 Resurrection / New Build - Jamieh2013 - 28-06-2015
Any signs of an engine yet?
RE: darrenjlobb's Compound Blown Derv Bus - 2015 Resurrection / New Build - Kezzieboy - 28-06-2015
Anything but Peugeot wheels that have been done to death, this deserves better!
RE: darrenjlobb's Compound Blown Derv Bus - 2015 Resurrection / New Build - xudlingo - 29-06-2015
406 v6 coupe wheels et12 I'm sure
Like idea cossie wheels
darrenjlobb's Compound Blown Derv Bus - 2015 Resurrection / New Build - Ollie - 29-06-2015
Cossies, fondmetals or compomotive M06
RE: darrenjlobb's Compound Blown Derv Bus - 2015 Resurrection / New Build - mr_fish - 29-06-2015
bugger the wheels, get the engine in first.
RE: darrenjlobb's Compound Blown Derv Bus - 2015 Resurrection / New Build - xudlingo - 29-06-2015
Yes what he said ^^^^
RE: darrenjlobb's Compound Blown Derv Bus - 2015 Resurrection / New Build - ginge191 - 29-06-2015
(29-06-2015, 02:24 PM)mr_fish Wrote: bugger the wheels, get the engine in first.
true story ; a lobb project with 8 pages with painting and bodywork is dissapoint! Lets see what engine is going in!
RE: darrenjlobb's Compound Blown Derv Bus - 2015 Resurrection / New Build - darrenjlobb - 29-06-2015
(28-06-2015, 09:15 PM)Jamieh2013 Wrote: Any signs of an engine yet?
(29-06-2015, 02:24 PM)mr_fish Wrote: bugger the wheels, get the engine in first.
(29-06-2015, 03:22 PM)xudlingo Wrote: Yes what he said ^^^^
(29-06-2015, 04:21 PM)ginge191 Wrote:(29-06-2015, 02:24 PM)mr_fish Wrote: bugger the wheels, get the engine in first.
true story ; a lobb project with 8 pages with painting and bodywork is dissapoint! Lets see what engine is going in!
Sorry I know the thread is a bit boring for the time being, but I made myself a promise and that was to sort the car out this time before I get involved in the motor, as once that happens all hope for the car is lost! And its coming on for being 20 years old now, and was in dyer need of some love, so I'm determined to sort the car out first!
Anyway there is a bit of an update, we got the roof etc back on the cummins ready for safety inspection etc, which means I was able to push my car back in the 'shop again, how long it will stay in there this time before something else kicks it out again I don't know, however its in for now, so had better make the most of it!
So pushed it in:
![[Image: DSC_0002.JPG]](http://hosting.darrenjlobb.co.uk/data/jd_derv_bus/DSC_0002.JPG)
![[Image: DSC_0001.JPG]](http://hosting.darrenjlobb.co.uk/data/jd_derv_bus/DSC_0001.JPG)
And proceeded to drop the beam:
![[Image: DSC_0008.JPG]](http://hosting.darrenjlobb.co.uk/data/jd_derv_bus/DSC_0008.JPG)
![[Image: DSC_0019.JPG]](http://hosting.darrenjlobb.co.uk/data/jd_derv_bus/DSC_0019.JPG)
![[Image: DSC_0026.JPG]](http://hosting.darrenjlobb.co.uk/data/jd_derv_bus/DSC_0026.JPG)
![[Image: DSC_0032.JPG]](http://hosting.darrenjlobb.co.uk/data/jd_derv_bus/DSC_0032.JPG)
Followed by the fuel tank / fuel lines / brake lines and cables etc:
![[Image: DSC_0028.JPG]](http://hosting.darrenjlobb.co.uk/data/jd_derv_bus/DSC_0028.JPG)
![[Image: DSC_0029.JPG]](http://hosting.darrenjlobb.co.uk/data/jd_derv_bus/DSC_0029.JPG)
Then it was time to start the fun task of rubbing down all the underside / wheel archs etc to get back to bare metal / paint, so remove all the crud / underseal etc to investigate any rust / problems:
![[Image: DSC_0033.JPG]](http://hosting.darrenjlobb.co.uk/data/jd_derv_bus/DSC_0033.JPG)
![[Image: DSC_0035.JPG]](http://hosting.darrenjlobb.co.uk/data/jd_derv_bus/DSC_0035.JPG)
![[Image: DSC_0037.JPG]](http://hosting.darrenjlobb.co.uk/data/jd_derv_bus/DSC_0037.JPG)
![[Image: DSC_0034.JPG]](http://hosting.darrenjlobb.co.uk/data/jd_derv_bus/DSC_0034.JPG)
![[Image: DSC_0039.JPG]](http://hosting.darrenjlobb.co.uk/data/jd_derv_bus/DSC_0039.JPG)
As you can see a fair bit of surface rust around, and 3-4 places more serious, so once I have cleaned up the rest of the underside / front wheel archs, theres a few places that I'm going to have to chop out / weld in new steel, Yes I could just paint over it / leave it, but little point in burying the issue, might as well sort it all out now, so thats where we are at right now!
Thanks for reading