+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: General (https://www.306oc.co.uk/forum/forumdisplay.php?fid=6)
+--- Forum: The Couch (https://www.306oc.co.uk/forum/forumdisplay.php?fid=7)
+--- Thread: GoPro / SJ4000 bike mounts (/showthread.php?tid=29123)
GoPro / SJ4000 bike mounts - Dum-Dum - 06-02-2015
Anyone know of any good mounts for using a gopro or SJ4000 on a bike. I've had my SJ4000 out on the bike today and the handle bar mount was artocious, helmet sticky pads always look too high so I mounted a sticky pad on the front of the stem then secured it with a strap but the footage as terrible (see below). I've gotta say for alot of it its so rough that its difficult to actually see when your riding but I'd of hoped the camera would be better, the only bits that are smooth are when I'm in the air.
[attachment=21561]
RE: GoPro / SJ4000 bike mounts - Atterz - 06-02-2015
Mount it to your lid.
RE: GoPro / SJ4000 bike mounts - Dave - 07-02-2015
As said stick it to your helmet 10000% better
RE: GoPro / SJ4000 bike mounts - bigcheez2k3 - 07-02-2015
What sort of helmet do you have? If you're worried about it being too high you could mount it on the side depending on your helmet.
Or you can get harnesses for the chest you can mount cameras in.
RE: GoPro / SJ4000 bike mounts - Dum-Dum - 07-02-2015
OK lads, any recommendations for a helmet mount, is a 3M sticky pad OK or one of the special helmet mounts?
I have 3 lids, a dirt lid, a full face lid and a normal mountain bike/road lid that is what I use the most.
I did consider the side of the lid but was worried that the more arms you add the more chance it has of movement. Also I'm worried that without the straps being stupid tight that both helmet and chest cams will move too much.
RE: GoPro / SJ4000 bike mounts - cully - 07-02-2015
(06-02-2015, 11:19 PM)Atterz Wrote: Mount it to your lid.
but he only has a small helmet you should remember!
RE: GoPro / SJ4000 bike mounts - Piggy - 07-02-2015
Yeah I found the same matey.
Rubbish on the bars but ace on me head!!
RE: GoPro / SJ4000 bike mounts - RetroPug - 07-02-2015
I used a chest mount for skiing and that worked well.
RE: GoPro / SJ4000 bike mounts - Niall - 07-02-2015
It always will be shite on the handlebars no matter what mount. People dont realise how much they move the bars till they see a video from them lol
Lid is the best bet. Go pro do curved 3M mounts. Ive got one on my full facer and you couldn't pull it off of there if you tried. They arent cheap but i can guarantee its not going to go anywhere!
Btw, how you getting on with the forks?
RE: GoPro / SJ4000 bike mounts - Dum-Dum - 07-02-2015
(07-02-2015, 12:04 PM)Niall Wrote: Btw, how you getting on with the forks?
As you can see from the video they are still on.
I like them but I really need to find my adaptor and put some more air in them. They knock and the steerer is massively too short but they'll do till I kill them properly.
I really want to build up an orange alpine (although with the five style swing arm) with 650b wheels so it'll do till I can afford one of those.
RE: GoPro / SJ4000 bike mounts - 7057sam - 07-02-2015
(07-02-2015, 12:04 PM)Niall Wrote: It always will be shite on the handlebars no matter what mount. People dont realise how much they move the bars till they see a video from them lol
Lid is the best bet. Go pro do curved 3M mounts. Ive got one on my full facer and you couldn't pull it off of there if you tried. They arent cheap but i can guarantee its not going to go anywhere!
Btw, how you getting on with the forks?
Was it the 3m stuff you get with the go pro as I got some with my hero 4 and was abit weary of using it.
RE: GoPro / SJ4000 bike mounts - Niall - 07-02-2015
It is yeah Sam
Chris, I've got a pump adaptor which you can have. I'll bring it to ace this month if you like?
RE: GoPro / SJ4000 bike mounts - Pete - 08-02-2015
Lid mounted or chest mounted FTW (I prefer to watch chest mounted stuff TBH, seem to get more of an impression of speed)
RE: GoPro / SJ4000 bike mounts - Grant - 08-02-2015
This is how I have it mounted on my full-facer. I had a plastic arm before, that snapped under the stress of the camera, from big drops etc. I have since upgraded the arm to an aluminium version, and the pad hasn't even budged a bit.
As mentioned above, its a 3M one, would thoroughly recommend.
![[Image: 1476457_10151790559268511_1573247266_n.j...b18b34c734]](https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-prn2/v/t1.0-9/1476457_10151790559268511_1573247266_n.jpg?oh=3f4d459b5f77cffb780fe60949dcc076&oe=556352CE&__gda__=1431550712_40b922ec6bb772ab895681b18b34c734)
EDIT: A quick video with it on. Nothing fancy as it was at the end of the day and I was ruined.
RE: GoPro / SJ4000 bike mounts - Eeyore - 09-02-2015
er... grant if you hit somehting head on do you not just get an aluminium rod through your head?
RE: GoPro / SJ4000 bike mounts - Dum-Dum - 09-02-2015
You spend too much time looking at the camera Grant
RE: GoPro / SJ4000 bike mounts - 1616six - 09-02-2015
I don't know if I'm missing the point here but isn't the camera meant to face the other way? Why are you filming your face?
RE: GoPro / SJ4000 bike mounts - Grant - 09-02-2015
(09-02-2015, 10:31 AM)Eeyore Wrote: er... grant if you hit somehting head on do you not just get an aluminium rod through your head?
I suppose there is that risk. What the actual chances of hitting something dead straight, and at the right angle to do so are, I'm not sure. I've yet to hear of it.
(09-02-2015, 10:58 AM)Dum-Dum Wrote: You spend too much time looking at the camera Grant
Not sure if serious or troll.... lol
(09-02-2015, 11:11 AM)JJ0063 Wrote: I don't know if I'm missing the point here but isn't the camera meant to face the other way? Why are you filming your face?
Then the camera could be turned around to film forwards. If you wanted to do that though, there is no need for the arm, and you may as well plonk it straight on top of the lid
RE: GoPro / SJ4000 bike mounts - 1616six - 09-02-2015
Oh I see
So you actually purchased it to film your face? I don't do off road cycling so I'm not down with the kids but why do you want to film your face? I can understand filming in front of you but am I missing something? All I'd see is my squashed hamster cheeks & some weird facial expressions as I fall off or something
RE: GoPro / SJ4000 bike mounts - Grant - 09-02-2015
(09-02-2015, 03:42 PM)JJ0063 Wrote: Oh I see
So you actually purchased it to film your face? I don't do off road cycling so I'm not down with the kids but why do you want to film your face? I can understand filming in front of you but am I missing something? All I'd see is my squashed hamster cheeks & some weird facial expressions as I fall off or something
I primarily bought it to use for waterskiing (the camera is too low down on the ski using just a mount) but had a little mess around with it on my lid. I was mainly using the above pictures/video to demonstrate the strength of the sticky pad.
The below is a good video to demonstrate what can be achieved. Although they are shit hot freeriders
https://www.youtube.com/watch?v=cN-YTcSnE6c
RE: GoPro / SJ4000 bike mounts - Niall - 09-02-2015
(09-02-2015, 03:33 PM)Grant Wrote:(09-02-2015, 10:31 AM)Eeyore Wrote: er... grant if you hit somehting head on do you not just get an aluminium rod through your head?
I suppose there is that risk. What the actual chances of hitting something dead straight, and at the right angle to do so are, I'm not sure. I've yet to hear of it.
Funnily enough, thats how Michael Schumacher is now spasticated. He had a go pro on his helmet which smashed his helmet in...giggidy.
RE: GoPro / SJ4000 bike mounts - Dum-Dum - 09-02-2015
I do like the idea of the arms but I'd love to extend it behind the helmet looking forward so you get the feeling you are following the rider really close like a computer game view
RE: GoPro / SJ4000 bike mounts - Grant - 09-02-2015
(09-02-2015, 06:56 PM)Niall Wrote:(09-02-2015, 03:33 PM)Grant Wrote:(09-02-2015, 10:31 AM)Eeyore Wrote: er... grant if you hit somehting head on do you not just get an aluminium rod through your head?
I suppose there is that risk. What the actual chances of hitting something dead straight, and at the right angle to do so are, I'm not sure. I've yet to hear of it.
Funnily enough, thats how Michael Schumacher is now spasticated. He had a go pro on his helmet which smashed his helmet in...giggidy.
His was just a gopro without and arm though. The glue aparently weakened the chemical makeup of the helmet, reducing its impact resistance.
That said, the point Sam makes has put some horrid thoughts in my head. Hopefully not a chunk of ally though