Brake light switch - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22) +--- Forum: Electrics (https://www.306oc.co.uk/forum/forumdisplay.php?fid=23) +--- Thread: Brake light switch (/showthread.php?tid=28811) |
Brake light switch - mackat - 19-01-2015 Finally got my arse into gear and fixed the XSI – (yay) – Started up first time, but the brake lights where constantly on. Found the brake light switch had popped out when doing the dash. Is there an easy way of refitting the switch without pulling everything apart again? Thanks RE: Brake light switch - Paul_13 - 19-01-2015 Small hands! RE: Brake light switch - welshpug - 19-01-2015 naah, skinny hands! or drop the steering column. RE: Brake light switch - mackat - 19-01-2015 My flatmate has even tried, and she's a tiny woman with dinky hands.. When you say drop the steering column, that would be the 2-4 bolts underneath the box - How does that help? RE: Brake light switch - welshpug - 19-01-2015 the switch is inside the steering column bracket RE: Brake light switch - mackat - 19-01-2015 aha understood! Thanks chaps, will have another go at it this weekend RE: Brake light switch - Redordead89 - 29-05-2015 Skinny hands to hold the switch in place and a large E clip fitted on to the ribbed section of the switch from the footwell side if you've lost the original clip! RE: Brake light switch - Lwilliams - 30-05-2015 I managed to do it eventually, cut shit out of my hands though -.- it can be done RE: Brake light switch - Seb_Ryan - 30-05-2015 Lie upside down is the best advice i can give lol RE: Brake light switch - bashbarnard - 30-05-2015 I had my speedo out and someone had drilled a nice hole to fit them. Took me 15 mins. And some swear words. Lol |