+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20)
+--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3)
+--- Thread: Puglove's supercharged 6, Repaint (/showthread.php?tid=2839)
RE: Puglove's Diablo 6, cage fitted & headliner - puglove - 26-11-2013
compression test says its as sweet as a nut though!
RE: Puglove's Diablo 6, cage fitted & headliner - Niall - 26-11-2013
(26-11-2013, 09:34 PM)puglove Wrote: compression test says its as sweet as a nut though!
Sure it will be. They are a pretty strong engine in all fairness unless you use them like a water pump like a certain Rallye owner
RE: Puglove's Diablo 6, cage fitted & headliner - puglove - 26-11-2013
(26-11-2013, 09:36 PM)Niall Wrote:(26-11-2013, 09:34 PM)puglove Wrote: compression test says its as sweet as a nut though!
Sure it will be. They are a pretty strong engine in all fairness unless you use them like a water pump like a certain Rallye owner
RE: Puglove's Diablo 6, cage fitted & headliner - puglove - 13-12-2013
Suppose i should up date this really, people on Facebook know but for those who dont
Little strip down
Then some little additions
Also got me some OEM looking gauges
Then mocked up the cooler , oil coolers pipe work, etc, made some templates for brackets
Got all the brackets, pipe work , all made up welded & painted now, Just waiting on a few parts to turn up then i can final fit every thing
RE: Puglove's Diablo 6, cage fitted & headliner - Grant - 13-12-2013
You routing the intercooler piping through your washer bottle?
:p
RE: Puglove's Diablo 6, cage fitted & headliner - puglove - 13-12-2013
yeah 2 1/4" core bit , slide the pipe through then silicone around the pipe
RE: Puglove's Diablo 6, cage fitted & headliner - Dum-Dum - 13-12-2013
Why 2 oil temp gauges and also isn't your boost gauge a tad optimistic?
RE: Puglove's Diablo 6, cage fitted & headliner - puglove - 13-12-2013
One for charger oil temp & one for engine oil, & yes the boost gauge is very optimistic but it was the least chavtastic one i could find
RE: Puglove's Diablo 6, cage fitted & headliner - Grant - 13-12-2013
(13-12-2013, 06:20 PM)puglove Wrote: yeah 2 1/4" core bit , slide the pipe through then silicone around the pipe
Glad I'm not the only one who actually thought through the practicality of doing so
RE: Puglove's Diablo 6, cage fitted & headliner - Niall - 13-12-2013
Ooh i like that boost gauge. Where did you get it and how much?
Im not sure if I'm going to take my drivers side boost pipe over the top of the IC and in through the passengers side of the rad or if I'm going to do the same as you. Are you cutting the hole for the bottle filler neck bigger to take a pipe through there?
RE: Puglove's Diablo 6, cage fitted & headliner - puglove - 13-12-2013
It is from the mighty ebay, cant remember how much it was ?
No the IC pipe loops back behind the lower slam panel , It does a full 180* loop off the end of the IC if you get me, obviously that pipe you see in the pic was cut right down.
RE: Puglove's Diablo 6, cage fitted & headliner - Niall - 13-12-2013
Ah ok and spins around where the AC pump used to be? Never thought of going that way. Giggidy.
RE: Puglove's Diablo 6, cage fitted & headliner - puglove - 13-12-2013
Yes correct, but my PAS is there now so it needs to drop abit lower, its not ideal but i think it will be fine, it was the best way i could see doing it without chopping the chassis. All i had to do was just extend the washer bottle mounts 40-50mm to allow the pipe through
RE: Puglove's Diablo 6, Blown!! - sam - 29-12-2013
Any news!!!!!!!!!
RE: Puglove's Diablo 6, Blown!! - Piggy - 29-12-2013
Looking good jamie...but does it run?
RE: Puglove's Diablo 6, Blown!! - Mrs puglove - 29-12-2013
hasn't yet !
Don't think there is to much further to go now though
Its alot further on than the last pics
RE: Puglove's Diablo 6, Blown!! - Niall - 29-12-2013
(29-12-2013, 10:15 PM)Piggy Wrote: Looking good jamie...but does it run?
Yeah but being a older Lynx kit, not very well
RE: Puglove's Diablo 6, Blown!! - puglove - 30-12-2013
Yeah its pretty much there. I need to put some fluids back in tighten a few bits and it will run.
A niall its the V2 not the V1 with the revised map
RE: Puglove's Diablo 6, Blown!! - Niall - 30-12-2013
(30-12-2013, 11:17 AM)puglove Wrote: Yeah its pretty much there. I need to put some fluids back in tighten a few bits and it will run.
A niall its the V2 not the V1 with the revised map
Ah good good. Looking at the manifold, its an early one and I've heard the early maps had a lot of issues.
RE: Puglove's Diablo 6, Blown!! - ozonehostile - 30-12-2013
*blown * is a very misleading title :-P
I was expecting to see fire and engines with holes in haha
RE: Puglove's Diablo 6, Blown!! - puglove - 30-12-2013
Yeah I had read that the V1 had problems so when I was talking to rich he said he would be sending all the gear to aviod the issues with the same earlier kits.so should be no issues with this
RE: Puglove's Diablo 6, Blown!! - Poodle - 31-12-2013
I'm calling bs on the thread title, do it properly! :p
RE: Puglove's Diablo 6, Blown!! - Tom - 31-12-2013
So is this running and going? Or still in the garage?
RE: Puglove's Diablo 6, Blown!! - puglove - 30-01-2014
For all the people who have spent the last 2 years moaning & trolling me about this charger!
http://www.youtube.com/watch?v=iKnv728q6NU
RE: Puglove's Diablo 6, actualy supercharged - Piggy - 30-01-2014
Woooppphoooooophooooo!
Congrats buddy...cant wait to see it mappd n jazz
RE: Puglove's Diablo 6, actualy supercharged - Poodle - 30-01-2014
Awesome! Good work man, about time and all! :p
Can't wait to see this go.
RE: Puglove's Diablo 6, actualy supercharged - Niall - 30-01-2014
(30-01-2014, 05:10 PM)Piggy Wrote: Woooppphoooooophooooo!
Congrats buddy...cant wait to see it mappd n jazz
This won't be mapped i doubt. Its still running a standard ECU with the generic low boost map.
RE: Puglove's Diablo 6, actualy supercharged - puglove - 30-01-2014
But it will be mapped eventually niall
RE: Puglove's Diablo 6, actualy supercharged - Niall - 30-01-2014
Good man. Will you be going aftermarket or sticking with the standard ECU?
RE: Puglove's Diablo 6, actualy supercharged - puglove - 30-01-2014
Pppfftt i OE ecu will be going in the bin, along with the inlet manni, and the TB will be changing location........ but were talking off season end of this year