Phantom Connector - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22) +--- Forum: Electrics (https://www.306oc.co.uk/forum/forumdisplay.php?fid=23) +--- Thread: Phantom Connector (/showthread.php?tid=28128)

Phantom Connector - Eddleston - 04-12-2014 While getting my inlet manifold back on I dropped a bolt down the side of the block. I found it resting on this connector. (grey one between starter and bracket) What on earth is it? Nothing from my loom matches it and I remember changing it from the old blown block onto this replacement one. Annoyingly this is all I need to sort before I pop the manifold on and drop the engine in! aaaagh I'll do a build thread eventually lol RE: Phantom Connector - Toms306 - 04-12-2014 Oil pressure switch. RE: Phantom Connector - welshpug - 04-12-2014 there's often two switches fitted, so you wont have a plug for that one. Phantom Connector - j-n-88 - 21-12-2014 Is that the one on the same loom as the wire that goes to the idle control valve? I found a similar one while changing mine and can't figure out where it goes.