306 rallye trackday project - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20) +--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3) +--- Thread: 306 rallye trackday project (/showthread.php?tid=28088) |
RE: 306 rallye trackday project - twangy - 14-01-2016 refurbing all front suspension , here are the PTS tubular adjustable front wishbones , ready for going back on car RE: 306 rallye trackday project - twangy - 18-01-2016 started making lightweight motorsport loom all with overbraid RE: 306 rallye trackday project - roland rat - 18-01-2016 Those bottom arms are a work of art! RE: 306 rallye trackday project - twangy - 18-01-2016 (18-01-2016, 08:32 PM)roland rat Wrote: Those bottom arms are a work of art!yes mate ,they are genuine PTS bottom arm i got hold of ,slily money to buy new for what they are RE: 306 rallye trackday project - Magenta Sunset - 18-01-2016 how on earth do you thread braid? (respect!) RE: 306 rallye trackday project - Piggy - 18-01-2016 How did you ensure the subframe didn't warp while welding may I ask? Loving this by the way... Only project that makes me want a perv RE: 306 rallye trackday project - twangy - 19-01-2016 (18-01-2016, 10:12 PM)Piggy Wrote: How did you ensure the subframe didn't warp while welding may I ask? RE: 306 rallye trackday project - Piggy - 19-01-2016 Righto. I wasn't sure if there would be a need to make a jig to hold it see RE: 306 rallye trackday project - twangy - 21-01-2016 vts steering rack delivered today , also got aload more carbon fibre , 16sq metre in total so can make some more lighter panels for car , and cleaned up and painted 5 alloys for the wet tyres to be fitted to , so have absolutely loads to get on with car RE: 306 rallye trackday project - Piggy - 22-01-2016 Arrgghhhnomnomnomnom RE: 306 rallye trackday project - roland rat - 22-01-2016 Love raceline rl 7 alloys!!! RE: 306 rallye trackday project - Day666 - 24-01-2016 Epic Car & your a really nice bloke Wayne .... Dam I hate you RE: 306 rallye trackday project - twangy - 24-01-2016 (24-01-2016, 01:36 PM)Day666 Wrote: Epic Car & your a really nice bloke Wayne .... cheers mate ,nice for you to say so , top bloke yourself RE: 306 rallye trackday project - Dum-Dum - 24-01-2016 (11-06-2015, 01:15 PM)twangy Wrote:(11-06-2015, 09:51 AM)Dum-Dum Wrote: Sorry, what does the standard aux bracket weigh?standard aux bracket weigh over 7kg , Bugger, that's hefty. Loving the garage extension and the doors look pukka now they are painted. RE: 306 rallye trackday project - twangy - 01-02-2016 right found out nobody makes carbon fibre cambelt cover ,so made mould and layed up in carbon fibre , so will remove tomorrow and see how it turns out like .then might make some more RE: 306 rallye trackday project - twangy - 04-02-2016 right pulled first carbon cambelt cover from mould , but decided to make phase 2 cambelt cover , so just ready for final trim and flat and polish ,ready for engine build RE: 306 rallye trackday project - twangy - 19-02-2016 with engine getting rebuilt ,decide to start on other mods , so stripped interior ready for cage work ,am adding extras to door bars and triangulating to front top mounts and strengthening in a few more places as my kids drive car aswell ,so safety has to come priority , will add more picture as go along RE: 306 rallye trackday project - Piggy - 19-02-2016 Less cage. More carbon. RE: 306 rallye trackday project - twangy - 19-02-2016 (19-02-2016, 09:54 PM)Piggy Wrote: Less cage. just you rest up and get that leg better , theres going to be loads more carbon and weight saving , just got to sourght safety first and stop front end flex , even make kids were full safety nomex suit before driving car RE: 306 rallye trackday project - twangy - 28-02-2016 [attachment=26657]got a bit more cage work done today , got both x door bars in and rear main hoop sections in ,and got one side of triangulation to front turret ,hopefully will find time to finish drivers side triangulation to turret this week , then can prep for paint. fingers crossed RE: 306 rallye trackday project - Piggy - 29-02-2016 Good good RE: 306 rallye trackday project - twangy - 03-03-2016 managed to triangulate drivers side strut turret , and modified original wiper motor by turning motor and drilling the 3 fixing holes that hold motor and trimming mounting plate , so all fits in original mounting holes , so primer new cage work this weekend hopefully RE: 306 rallye trackday project - adam b - 03-03-2016 Nice, mine has to use a zx single wiper due to the cage.. RE: 306 rallye trackday project - twangy - 03-03-2016 (03-03-2016, 08:23 PM)adam b Wrote: Nice, mine has to use a zx single wiper due to the cage.. RE: 306 rallye trackday project - twangy - 05-03-2016 finished fibreglassing bulk head and managed to mask car out , and primed new cage work ,then decided to go for it with being mothers day tomorow . so ended up painting inside ,will start fitting up inside this week RE: 306 rallye trackday project - Piggy - 05-03-2016 Shweeeeeeeeeeeeeeet. X3 RE: 306 rallye trackday project - twangy - 05-03-2016 (05-03-2016, 10:37 PM)Piggy Wrote: Shweeeeeeeeeeeeeeet. X3cheers piggy , hows that leg doing RE: 306 rallye trackday project - Piggy - 05-03-2016 (05-03-2016, 10:45 PM)twangy Wrote:(05-03-2016, 10:37 PM)Piggy Wrote: Shweeeeeeeeeeeeeeet. X3cheers piggy , hows that leg doing Least of my problems...bloody heavy raging cold n mouth full of ulcers... Little updates like these keeping me sane!!! RE: 306 rallye trackday project - Niall - 06-03-2016 This gets more and more epic every time i look at this thread! RE: 306 rallye trackday project - twangy - 06-03-2016 (06-03-2016, 09:19 AM)Niall Wrote: This gets more and more epic every time i look at this thread! cheers niall , will give regular post as going along , would be nice to have ready for pugfest |