306 rallye trackday project - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20) +--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3) +--- Thread: 306 rallye trackday project (/showthread.php?tid=28088) |
RE: 306 rallye trackday project - Dum-Dum - 11-05-2015 Those mounting bells for the discs what is the thickness and offset of them, are they an off the shelf part? RE: 306 rallye trackday project - twangy - 12-05-2015 mounting bells are cosworth 909 parts , will try and measure offset for you this week RE: 306 rallye trackday project - Dum-Dum - 14-05-2015 (12-05-2015, 06:16 PM)twangy Wrote: mounting bells are cosworth 909 parts , will try and measure offset for you this week Cheers mate. What thickness are the discs too and are they running fine with the standard GTi6 calipers, have you got any squealing issues? RE: 306 rallye trackday project - twangy - 14-05-2015 disc size is AP 285 x 25mm , there of the rear of 1 of my old cosworths , fit fine with calipers just had to ease caliper brackets , don't no if squeal yet as haven't used car since fitting RE: 306 rallye trackday project - twangy - 14-05-2015 finally back on car ,have fitted and painted rear carbon hatch ,and also carbon spoiler now fitted , also remove rub strips from side and filled holes and painted , will flat and polish over weekend and refit replacement graphics also painted carbon door inner on both and outer drivers , will flat polish and fit over weekend and graphic up RE: 306 rallye trackday project - twangy - 15-05-2015 clear lacquered were have left bare carbon fibre RE: 306 rallye trackday project - RetroPug - 16-05-2015 Those doors look great! RE: 306 rallye trackday project - kentiiboii - 16-05-2015 Would you consider making making a fiberglass boot? If so I'd be interested :-) RE: 306 rallye trackday project - twangy - 16-05-2015 (16-05-2015, 11:37 AM)kentiiboii Wrote: Would you consider making making a fiberglass boot? just got to get properly on feet and will start making some panels (16-05-2015, 08:06 AM)RetroPug Wrote: Those doors look great! thanks mate RE: 306 rallye trackday project - kentiiboii - 16-05-2015 (16-05-2015, 02:54 PM)twangy Wrote:Nice one :-)(16-05-2015, 11:37 AM)kentiiboii Wrote: Would you consider making making a fiberglass boot? RE: 306 rallye trackday project - twangy - 16-05-2015 right then ,flatted and polished and fitted drives side carbon door and replaced graphics , will start on other side next week , then wiil try and get weight on thing RE: 306 rallye trackday project - twangy - 23-05-2015 carbon bonnet now painted , so just got to flat and polish and refit onto car and graphic up , has carbon showing through on some graphic like on doors . will add picture next few days RE: 306 rallye trackday project - 7057sam - 24-05-2015 Comming on really well When are you aiming to get back rallying? RE: 306 rallye trackday project - twangy - 25-05-2015 (24-05-2015, 07:01 PM)7057sam Wrote: Comming on really welldon't know if I am going to bother rallying car for now , or just do track days and sprints for a bit till done engine mods sam , RE: 306 rallye trackday project - twangy - 27-05-2015 started refitting carbon bonnet today before rain stopped play , just got to line up properly and fit bonnet pins , also got to buff front wings as need a good polish RE: 306 rallye trackday project - twangy - 10-06-2015 [attachment=23714]quick update , haven't really had time to do much on car with one thing and the other , but altered rear bumper , and still collecting bits for throttle bodies conversion RE: 306 rallye trackday project - twangy - 10-06-2015 also managed to get hold of lighter non PAS engine mounting , good weight saving as only weighs 2.7 kg compared to heavy weight standard aux bracket RE: 306 rallye trackday project - Dum-Dum - 11-06-2015 Sorry, what does the standard aux bracket weigh? RE: 306 rallye trackday project - Eeyore - 11-06-2015 (10-06-2015, 06:05 PM)twangy Wrote: also managed to get hold of lighter non PAS engine mounting , good weight saving as only weighs 2.7 kg compared to heavy weight standard aux bracket where did you get the bracket from? I really need one! RE: 306 rallye trackday project - twangy - 11-06-2015 (11-06-2015, 09:51 AM)Dum-Dum Wrote: Sorry, what does the standard aux bracket weigh?standard aux bracket weigh over 7kg , RE: 306 rallye trackday project - twangy - 11-06-2015 (11-06-2015, 11:22 AM)Eeyore Wrote:(10-06-2015, 06:05 PM)twangy Wrote: also managed to get hold of lighter non PAS engine mounting , good weight saving as only weighs 2.7 kg compared to heavy weight standard aux bracket miles , from pugracing RE: 306 rallye trackday project - twangy - 21-09-2015 haven't been on site for a good while due to loads of misfortune and at one stage was going to strip car and get rid of but have decided to keep and do a load more too it , so have been building new home for it , so can get stuck into it over winter and today got roof on and remote roller shutter and car under cover RE: 306 rallye trackday project - Poodle - 22-09-2015 Nice! Where's the project thread for that? Seriously though, any chance of a write up? Hoping to do something similar myself soon and would appreciate the insight. RE: 306 rallye trackday project - Paul_13 - 22-09-2015 Think of checking for asbestos before demolishing that? RE: 306 rallye trackday project - twangy - 22-09-2015 (22-09-2015, 06:12 PM)Paul_13 Wrote: Think of checking for asbestos before demolishing that?had tin roof on it paul RE: 306 rallye trackday project - Matt-Rallye - 23-09-2015 Glad to see you haven't lost heart in it and even built a new man cave for it RE: 306 rallye trackday project - Paul_13 - 23-09-2015 Fair do's RE: 306 rallye trackday project - twangy - 24-09-2015 (23-09-2015, 01:47 PM)Matt-Rallye Wrote: Glad to see you haven't lost heart in it and even built a new man cave for it matt ,have never lost heart in car ,just had a lot of thing happen in life lately ,and was just going to sell up everything and start afresh ,but am more determine to keep car and do even more mods than I had originally planned , man cave is essential for winter time work ,keeping me and car nice and dry RE: 306 rallye trackday project - adam b - 24-09-2015 Keep it up mate RE: 306 rallye trackday project - twangy - 24-09-2015 (24-09-2015, 07:52 PM)adam b Wrote: Keep it up mate cheers adam , hows your car coming along m8 |