306oc - Peugeot 306 Owners Club & Forum
Anyone know where i can get a cheap LUK or valeo clutch? - Printable Version

+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: DW10 HDi section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=10)
+--- Thread: Anyone know where i can get a cheap LUK or valeo clutch? (/showthread.php?tid=27868)



Anyone know where i can get a cheap LUK or valeo clutch? - Iceman299 - 20-11-2014

As title really, rather ask on here before i get it from ECP

Thanks


Anyone know where i can get a cheap LUK or valeo clutch? - Jtrigga - 21-11-2014

Sometimes they go cheap on Amazon. Also look for a hdi 90 406, xantia or xsara clutch.


RE: Anyone know where i can get a cheap LUK or valeo clutch? - Pgtips - 21-11-2014

(21-11-2014, 12:28 AM)Jtrigga Wrote: Sometimes they go cheap on Amazon. Also look for a hdi 90 406, xantia or xsara clutch.

As above........i got a genuine valeo cluth kit (part number 826201) for £50.72 delivered a few weeks ago off Amazon & posted a link on here but they altered the price again a few hours later lUndecided


RE: Anyone know where i can get a cheap LUK or valeo clutch? - Iceman299 - 21-11-2014

Can anyone tell if this clutch is worn or still pretty new?


RE: Anyone know where i can get a cheap LUK or valeo clutch? - pro_steve - 21-11-2014

I can't really tell the depth of the grooves from that photo, but it looks as though the shallow one at the bottom has worn all the way through, so its quite worn? If it's out fit a new one, I can get some clutches for about £30 from Euro with my discount sometimes.


RE: Anyone know where i can get a cheap LUK or valeo clutch? - Iceman299 - 21-11-2014

Its a second hand valeo clutch i've found, apparantly only done 2000miles until the car was written off. £15 posted without the bearing


RE: Anyone know where i can get a cheap LUK or valeo clutch? - madmadmax - 21-11-2014

all depends how it was driven in them 2000 miels as it could have been driven by some who uses the clutch like the accelerator so thay will slip it all the way to 4000rpm then lift of it a bit and so on till 30mph is reched, so it could be a pos


RE: Anyone know where i can get a cheap LUK or valeo clutch? - mr_fish - 21-11-2014

(21-11-2014, 03:22 PM)madmadmax Wrote: all depends how it was driven in them 2000 miels as it could have been driven by some who uses the clutch like the accelerator so thay will slip it all the way to 4000rpm then lift of it a bit and so on till 30mph is reched, so it could be a pos

If so, they should really learn how to drive.

I see what your saying though.


RE: Anyone know where i can get a cheap LUK or valeo clutch? - Iceman299 - 21-11-2014

(21-11-2014, 03:22 PM)madmadmax Wrote: all depends how it was driven in them 2000 miels as it could have been driven by some who uses the clutch like the accelerator so thay will slip it all the way to 4000rpm then lift of it a bit and so on till 30mph is reched, so it could be a pos

Good point. I just got excited seeing it at less that £10 exc delivery lol


RE: Anyone know where i can get a cheap LUK or valeo clutch? - silverzx - 21-11-2014

I heard Frosty is breaking a black ph1 that has an ideal clutch in for a XUD conversion style clutch mechanism.


RE: Anyone know where i can get a cheap LUK or valeo clutch? - Slam Wagon - 21-11-2014

Got a new one here but no release bearing. £50 plus post

I think i do anyway, ill need to dig it out.


RE: Anyone know where i can get a cheap LUK or valeo clutch? - Iceman299 - 21-11-2014

(21-11-2014, 06:39 PM)Slam Wagon Wrote: Got a new one here but no release bearing. £50 plus post

I think i do anyway, ill need to dig it out.

Thanks for the offer dude, but by the time i pay for postage and release bearing, it will be the price for a new kit.

Would driving it, while it's not slipping until after 3k rpm, cause any damage etc?


RE: Anyone know where i can get a cheap LUK or valeo clutch? - Poodle - 22-11-2014

Driving a slipping clutch is fine, just be sympathetic. It's driving on a knackered release bearing that you want to avoid.


RE: Anyone know where i can get a cheap LUK or valeo clutch? - mcglynn - 22-11-2014

Can wear down to the point of rivets etc though and cause flywheel damage.


RE: Anyone know where i can get a cheap LUK or valeo clutch? - Poodle - 22-11-2014

Lol i assumed he wasn't going to drive it like that for a few months, and tbh you'd be amazed at how long they'll keep going without damage if you're gentle.


RE: Anyone know where i can get a cheap LUK or valeo clutch? - Iceman299 - 22-11-2014

I'm driving it as gently as a can, no hard accelerating or anything. It doesnt slip unless you really out your foot down but just feels like a standard hdi now lol


RE: Anyone know where i can get a cheap LUK or valeo clutch? - Toms306 - 22-11-2014

I drove on a slipping one for 4 months after remapping, and not gently either... lol

Must admit, the fly was a bit blue when I removed it. Itwasntme


RE: Anyone know where i can get a cheap LUK or valeo clutch? - Iceman299 - 22-11-2014

(22-11-2014, 04:39 PM)Toms306 Wrote: I drove on a slipping one for 4 months after remapping, and not gently either... lol

Must admit, the fly was a bit blue when I removed it. Itwasntme

My clutch lasted a week after remapping lol it seems to have settled down a lot more now compared to when it first started slipping.

I'll be using it a lot less for a bit, just got an e36 318s coupe today lol


RE: Anyone know where i can get a cheap LUK or valeo clutch? - mcglynn - 22-11-2014

Sometimes you even find they rebed themselves after you let them slip a few times. Happened with my own, has its moments now and again but on a v. strong stage 1 lol


RE: Anyone know where i can get a cheap LUK or valeo clutch? - Iceman299 - 23-11-2014

(22-11-2014, 11:06 PM)mcglynn Wrote: Sometimes you even find they rebed themselves after you let them slip a few times. Happened with my own, has its moments now and again but on a v. strong stage 1 lol

That's whats happended to mine but has v little power, same/slightly less than standard