Sump oil temp plug - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16) +--- Forum: DW10 HDi section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=10) +--- Thread: Sump oil temp plug (/showthread.php?tid=27648) |
Sump oil temp plug - pugdan95 - 07-11-2014 Afternoon All has anyone monitored there oil temp from the sump? or is it not do able on the 306 cause the thread pitch being M14X1.25 is a bit out there RE: Sump oil temp plug - 306clot - 07-11-2014 (07-11-2014, 03:31 PM)pugdan95 Wrote: Afternoon All the 306 gti6 oil temperature sensor is m14 x 1.25 and the HDI sump plug is m14 x 1.25 so if you have 2 sump plugs (i know i have) then you should be able to use the upper one a "6" sensor (or a after market one) as your oil temp then you would just need a gauge to read the sensor Jake RE: Sump oil temp plug - pugdan95 - 08-11-2014 (07-11-2014, 10:54 PM)306clot Wrote:(07-11-2014, 03:31 PM)pugdan95 Wrote: Afternoon All Yeah I've got too sump holes would this adaptor work with a 1/8 npt temp sensor screwed into it? http://www.demon-tweeks.co.uk/performance/fittings-accessories/lma-gauge-sender-unit-adaptors RE: Sump oil temp plug - 306clot - 08-11-2014 (08-11-2014, 01:01 PM)pugdan95 Wrote:(07-11-2014, 10:54 PM)306clot Wrote:(07-11-2014, 03:31 PM)pugdan95 Wrote: Afternoon All In theory yes as the outer thread will be the sump size and the inner the sensor size, but in my opinion a m14 sensor would be better but thats just me Jake RE: Sump oil temp plug - pugdan95 - 08-11-2014 (08-11-2014, 03:48 PM)306clot Wrote:(08-11-2014, 01:01 PM)pugdan95 Wrote:(07-11-2014, 10:54 PM)306clot Wrote: the 306 gti6 oil temperature sensor is m14 x 1.25 and the HDI sump plug is m14 x 1.25 so if you have 2 sump plugs (i know i have) then you should be able to use the upper one a "6" sensor (or a after market one) as your oil temp then you would just need a gauge to read the sensor Getting hold of a M14 sensor it's a bit hard and a gti 6 one is 55 quid just for the sensor think il go with a couple of adapters RE: Sump oil temp plug - Niall - 08-11-2014 Just get a second hand sensor? In fact i may even have one here you can have for £10 posted. RE: Sump oil temp plug - pugdan95 - 08-11-2014 (08-11-2014, 08:33 PM)Niall Wrote: Just get a second hand sensor? In fact i may even have one here you can have for £10 posted. And that one would just screw in and then I'd have to wire it up? Fully working niall? RE: Sump oil temp plug - Niall - 08-11-2014 (08-11-2014, 08:48 PM)pugdan95 Wrote:(08-11-2014, 08:33 PM)Niall Wrote: Just get a second hand sensor? In fact i may even have one here you can have for £10 posted. Let me check the shed tomorrow but yes. its a standard GTi one so yeah, should be fine! RE: Sump oil temp plug - pugdan95 - 08-11-2014 (08-11-2014, 08:52 PM)Niall Wrote:(08-11-2014, 08:48 PM)pugdan95 Wrote:(08-11-2014, 08:33 PM)Niall Wrote: Just get a second hand sensor? In fact i may even have one here you can have for £10 posted. Nice one if could have a look tomorrow for us and let me know if you've got one that would be great |