+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: DW10 HDi section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=10)
+--- Thread: MPPs help :-/ (/showthread.php?tid=27543)
MPPs help :-/ - Piggy - 02-11-2014
Totally new to this.
Spent a while over breakfast trial and error trying to get the MPPs software to work.
Each time i end up with a little box with a MPPs version and serial no box, a progress bar at 0% and a start and exit button.
It wont allow me to enter anything in the version or serial box and pressing start returns a message that says 'no device connected'
I have tried the MPPs dongle in both usb ports.
I guess i am missing something ruddy obvious?!
RE: MPPs help :-/ - Toms306 - 02-11-2014
Not running as administrator??
RE: MPPs help :-/ - Piggy - 02-11-2014
Nah I am
RE: MPPs help :-/ - vincent1 - 02-11-2014
does it show installed in device manager?
RE: MPPs help :-/ - Paul_13 - 02-11-2014
Had this problem the other day, sorry not much help but powerandtorque sorted it for me.
Something along the lines of the computer not registering my device had been plugged in
RE: MPPs help :-/ - cully - 02-11-2014
check the port number its installed under you might need to force it to be lower than port 10
RE: MPPs help :-/ - Piggy - 02-11-2014
How do I check the port number?!
MPPs has no drop down menus for that sort of thing!?
RE: MPPs help :-/ - pro_steve - 02-11-2014
Have you looked at my guide, it's got a trouble shooting section which shows you how to get it set up in device manager. You could just have a faulty tool if it's set up right.
RE: MPPs help :-/ - Piggy - 02-11-2014
(02-11-2014, 01:56 PM)pro_steve Wrote: Have you looked at my guide, it's got a trouble shooting section which shows you how to get it set up in device manager. You could just have a faulty tool if it's set up right.
On your website steve?
I'll put a brew on and have a look
Thanks
RE: MPPs help :-/ - Piggy - 02-11-2014
Nice guide steve, it was the software that was at fault. So used your mpps software, hope thats ok!
RE: MPPs help :-/ - pro_steve - 03-11-2014
No problem, here to help