+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XU Petrol Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=17)
+--- Thread: Heater matrix hoses and connector (/showthread.php?tid=27452)
Heater matrix hoses and connector - mackat - 26-10-2014
Is the heater matrix hoses and connection the same through all the phases?
Thanks :o)
RE: Heater matrix hoses and connector - mackat - 02-11-2014
AUGHHHHHHHHH.......!!!! If i could get the damn thing off I'd be a happy bunny!!
Anyone based around South London -Croydon area, fancy giving me a hand
RE: Heater matrix hoses and connector - Mattcheese31 - 02-11-2014
Don't forget to press the release switch as you pulling and work it round in a circle ad you pull.
RE: Heater matrix hoses and connector - mackat - 02-11-2014
Tried that, feels like it's welded in place.
...and both pipes have snapped! Knew I had to replace it, but this is more fun than I thought!
Ohhh and looking at the matrix after taking the dash off, no idea how that's gonna come out...
And it's pi55ing with rain, how badly is my day going!
RE: Heater matrix hoses and connector - welshpug - 02-11-2014
unbolt the heater box.
RE: Heater matrix hoses and connector - Mattcheese31 - 02-11-2014
it's not the most fun job . . .took me about 8 hours start to finish tbh . . . .let me see if i can find you a guide . .
here you go . .http://www.306gti6.com/forum/showthread.php?id=78999
RE: Heater matrix hoses and connector - mackat - 02-11-2014
Thanks Chaps - Gonna have another go once the rain has stopped.
Yeah was following that guide, I've noticed the P1 is slightly different (has extra bolts here and there), but common sense has got me to the point I am.
Why did I not doo this yesterday when it was sunny!
hahahaha
RE: Heater matrix hoses and connector - Mattcheese31 - 02-11-2014
(02-11-2014, 02:36 PM)mackat Wrote: Thanks Chaps - Gonna have another go once the rain has stopped.
Yeah was following that guide, I've noticed the P1 is slightly different (has extra bolts here and there), but common sense has got me to the point I am.
Why did I not doo this yesterday when it was sunny!
hahahaha
it's sunny here lol, mine was a phase 1 too, can't remember much being different . .
RE: Heater matrix hoses and connector - mackat - 02-11-2014
Well....! That was a complete fail for the day!
Fingers crossed for better luck next weekend! :p
RE: Heater matrix hoses and connector - mackat - 08-11-2014
Well that didn't go entirely as planned:
[attachment=19968]
[attachment=19969]
[attachment=19970]
[attachment=19971]
Managed to break a chunk off the evaporator housing, so I'll be needing a new one of those alone with the hose, connector and new matrix!
All a learning curve!
Can anyone tell me if the evaporator housing is the same through the whole range?
RE: Heater matrix hoses and connector - Mattcheese31 - 08-11-2014
errrr why did you take that housing out?? . . . . . no need homeslice . .
RE: Heater matrix hoses and connector - Mattcheese31 - 08-11-2014
also is your car a 5 door? . . . . . if so sell me your doorcards please? mine are tired . .
RE: Heater matrix hoses and connector - mackat - 08-11-2014
Sometimes I just get soooo carried away and have to take everything apart
[attachment=19972]
Only wanted to tighten you the wheel bolts!! :p
Was having hella time getting the matrix out, the end result was the housing had to come out too.
(08-11-2014, 09:11 AM)Mattcheese31 Wrote: also is your car a 5 door? . . . . . if so sell me your doorcards please? mine are tired . .
You can have the whole car for £700
RE: Heater matrix hoses and connector - Mattcheese31 - 08-11-2014
haha well seriously if you ever break it let me know, i converted the S16 half leather seats (same design as yours) to fit a 5 door and got same doorcards to match out an xsi, drivers doorcard is tatty though and it drives me mad . . .
[attachment=19973]
RE: Heater matrix hoses and connector - mackat - 08-11-2014
Nice..! I like that. Managed to pick up some p3 rear leather seats a month or so back, only to realise I couldn't fit the back rest properly.. D'oh!
The wing mirrors on the pug in your sig.. they from a p3 and if so where they a straight swap?
Breaking.. well the way I feel with it at the moment!!
But when it's all together.. shiny-shiny
[attachment=19974]
RE: Heater matrix hoses and connector - Mattcheese31 - 08-11-2014
(08-11-2014, 10:58 AM)mackat Wrote: Nice..! I like that. Managed to pick up some p3 rear leather seats a month or so back, only to realise I couldn't fit the back rest properly.. D'oh!You can fit the backs, just unzip them and slide on to your old frame for the different locking point, only takes a few minutes, the wing mirrors are phase one Sigma blue and sold last week, someone writ that car off for me
The wing mirrors on the pug in your sig.. they from a p3 and if so where they a straight swap?
Breaking.. well the way I feel with it at the moment!!
But when it's all together.. shiny-shiny
RE: Heater matrix hoses and connector - mackat - 08-11-2014
Ohhh in hind-sight should have kept them, but sold them after realising they didn't fit!
That sucks, sorry to here about that.
Looked a nice motor!
RE: Heater matrix hoses and connector - Mattcheese31 - 09-11-2014
(08-11-2014, 10:36 PM)mackat Wrote: Ohhh in hind-sight should have kept them, but sold them after realising they didn't fit!
That sucks, sorry to here about that.
Cheers, was pretty nice tbh, had a cheeky td04 on her,running about 150-160bhp, went well
RE: Heater matrix hoses and connector - mackat - 09-11-2014
(09-11-2014, 01:16 AM)Mattcheese31 Wrote:(08-11-2014, 10:36 PM)mackat Wrote: Ohhh in hind-sight should have kept them, but sold them after realising they didn't fit!
That sucks, sorry to here about that.
Cheers, was pretty nice tbh, had a cheeky td04 on her,running about 150-160bhp, went well
Sweet..!
Have to ask the question, what are you going to do with it?
RE: Heater matrix hoses and connector - Mattcheese31 - 10-11-2014
(09-11-2014, 10:43 PM)mackat Wrote:(09-11-2014, 01:16 AM)Mattcheese31 Wrote:(08-11-2014, 10:36 PM)mackat Wrote: Ohhh in hind-sight should have kept them, but sold them after realising they didn't fit!
That sucks, sorry to here about that.
Cheers, was pretty nice tbh, had a cheeky td04 on her,running about 150-160bhp, went well
Sweet..!
Have to ask the question, what are you going to do with it?
Getting broke for bits mate, got a cherry 306 now, will get her up to good power when I can
RE: Heater matrix hoses and connector - mackat - 13-11-2014
(10-11-2014, 01:29 AM)Mattcheese31 Wrote:(09-11-2014, 10:43 PM)mackat Wrote:(09-11-2014, 01:16 AM)Mattcheese31 Wrote: Cheers, was pretty nice tbh, had a cheeky td04 on her,running about 150-160bhp, went well
Sweet..!
Have to ask the question, what are you going to do with it?
Getting broke for bits mate, got a cherry 306 now, will get her up to good power when I can
Not having much luck finding the parts I need, and then I spotted a 6 for sale the other day and managed to buy it. Pick it up next following weekend
Where are you based as might be interested in a couple parts.
RE: Heater matrix hoses and connector - Mattcheese31 - 14-11-2014
(13-11-2014, 08:31 PM)mackat Wrote:(10-11-2014, 01:29 AM)Mattcheese31 Wrote:(09-11-2014, 10:43 PM)mackat Wrote: Sweet..!
Have to ask the question, what are you going to do with it?
Getting broke for bits mate, got a cherry 306 now, will get her up to good power when I can
Not having much luck finding the parts I need, and then I spotted a 6 for sale the other day and managed to buy it. Pick it up next following weekend
Where are you based as might be interested in a couple parts.
Other end of country sorry mate, Doncaster
RE: Heater matrix hoses and connector - mackat - 14-11-2014
(14-11-2014, 02:11 AM)Mattcheese31 Wrote: Other end of country sorry mate, Doncaster
Where are all the Londoners on this forum?
Might be heading up to Beverley 13th/14th Dec, could swing by on the way back down - That's if you have any parts left and I haven't done anything more stupid with the xsi
RE: Heater matrix hoses and connector - Mattcheese31 - 14-11-2014
(14-11-2014, 09:17 AM)mackat Wrote:(14-11-2014, 02:11 AM)Mattcheese31 Wrote: Other end of country sorry mate, Doncaster
Where are all the Londoners on this forum?
Might be heading up to Beverley 13th/14th Dec, could swing by on the way back down - That's if you have any parts left and I haven't done anything more stupid with the xsi
apparently there's more southern members or so i'm told lol . . . .what you need mate? no front bumper, boot, bonnet, wing mirrors or wings
RE: Heater matrix hoses and connector - mackat - 15-11-2014
(14-11-2014, 09:56 AM)Mattcheese31 Wrote: apparently there's more southern members or so i'm told lol . . . .what you need mate? no front bumper, boot, bonnet, wing mirrors or wings
Plans changed.. apparently I'm heading up/down on the weekend of Dec 21/22.
If I still can't source a evaporator housing that'll be the first thing on my list
RE: Heater matrix hoses and connector - Mattcheese31 - 15-11-2014
(15-11-2014, 02:36 PM)mackat Wrote:(14-11-2014, 09:56 AM)Mattcheese31 Wrote: apparently there's more southern members or so i'm told lol . . . .what you need mate? no front bumper, boot, bonnet, wing mirrors or wings
Plans changed.. apparently I'm heading up/down on the weekend of Dec 21/22.
If I still can't source a evaporator housing that'll be the first thing on my list
rightho chap . .
RE: Heater matrix hoses and connector - mackat - 15-11-2014
(15-11-2014, 03:04 PM)Mattcheese31 Wrote: rightho chap . .
Hopefully by the time Dec comes around I'll have enough post counts to pm you
RE: Heater matrix hoses and connector - mackat - 16-11-2014
Back on topic -
Since I completely annihilated the matrix connectors on both sides, I've managed to get new hoses and connectors, but when ordering the matrix does it come with everything I need to straight into the hose?
RE: Heater matrix hoses and connector - mackat - 16-11-2014
Aha..! Everything is included.. just gotta work out the difference between a valeo and behr now.