+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20)
+--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3)
+--- Thread: should really start a project thread... (/showthread.php?tid=27359)
should really start a project thread... - toseland - 22-10-2014
So.. toms306's er... 306, purchased and played and the bug of spending lots of pennies has well and truely started..
where i am at the moment
Stage 1+ Jammapic remap
Powerflow cat back stainless system (sounds LOVELY)
VTS front shocks (20mm lower)
now.. Dynoed today at
119.4hp/204.something ft/lb at the wheels, (not bad considering the boost leak)
this is with a slight (massive) boost leak, that i havent fixed because
in the next week or so
Performance
1. exhaust being sorted - cat removed to go with the nice powerflow backbox i have on there already (thanks toms)
2. boost gauge and manual boost controller being fitted
3. giant twinpass FMIC being fitted
4. boost being turned up to accomodate the smokeyness around 3000rpm, potentially to 17-18psi, maybe to 20
cosmetic
rear windows are being tinted the same shade of black as the heko wind deflectors
at some point: the wheels are being powercoated, the bonnet will be replaced (need a moonstone bonnet in good condition anyone?) need to get a halfrauds shopping list for the side of the car and some wolfrace 19inch alloys *ahem*
itll have a nice bit of servicing over the next few weeks too when i get time..
you can find the dyno graph and its lovely smooth curves
![[Image: IMAG0490.jpg]](https://dl.dropboxusercontent.com/u/68271453/IMAG0490.jpg)
RE: should really start a project thread... - 306Dan - 22-10-2014
Ripspeed not wolfrace
, nice little list you've got there should keep you busy for at least a day or two
RE: should really start a project thread... - toseland - 22-10-2014
still trying to decide where i mount the guage,
i seen a LOVELY center console mounted one that i think garath (or grant) on here makes.. i want.. a lot.
RE: should really start a project thread... - cully - 23-10-2014
(22-10-2014, 11:08 PM)toseland Wrote: still trying to decide where i mount the guage,
i seen a LOVELY center console mounted one that i think garath (or grant) on here makes.. i want.. a lot.
that would be garath he spends most his time on theywhoshallnotbenamed
RE: should really start a project thread... - Poodle - 23-10-2014
About time you got a thread up on here, although 19s, seriously? Can tell you're from Pompey. :p
Needs more pictures!
RE: should really start a project thread... - toseland - 23-10-2014
(23-10-2014, 05:44 AM)Poodle Wrote: About time you got a thread up on here, although 19s, seriously? Can tell you're from Pompey. :p
Needs more pictures!
yeah... I am looking for a rear beam from a 1.4 so I can fit the drum brakes and paint them red too so they stand out proper.. haha
RE: should really start a project thread... - Toms306 - 23-10-2014
That's a decent dyno result with the boost leak...some of the boost is falling out of the EGR blank and some out of the inlet elbow, not sure if there's any elsewhere...card gaskets don't work regardless of what people tell you on here!
What was it at the fly, seeing as the std 90 was measured ATF? I'd guess about 15hp tranny losses?
Will keep an eye on this thread.
RE: should really start a project thread... - toseland - 23-10-2014
(23-10-2014, 09:15 AM)Toms306 Wrote: That's a decent dyno result with the boost leak...some of the boost is falling out of the EGR blank and some out of the inlet elbow, not sure if there's any elsewhere...card gaskets don't work regardless of what people tell you on here!
What was it at the fly, seeing as the std 90 was measured ATF? I'd guess about 15hp tranny losses?
Will keep an eye on this thread.
yeah the IC elbow that's coming is welded up.. so that sorts that issue out completely, hopefully have some nice clamps too so again, muchos better.
I will be attacking that elbow's join with LOTS of RTV.
RE: should really start a project thread... - Toms306 - 23-10-2014
Cool, dunno if you've already got a mapper in mind for the stage 2 but I'd recommend JP, as it's his S1+ that's on there....
RE: should really start a project thread... - Eeyore - 23-10-2014
Sounds like some decent plans. Id recommend getting the single pod for the A pillar. It looks nice and there is a 306 specific one not just the generic rubbish.
If you need help ive got some 17" worlfrace dragons and some red calliper paint.
This is the look you want right?
![[Image: IMG_6147.jpg]](http://i1184.photobucket.com/albums/z327/srowell3/IMG_6147.jpg)
RE: should really start a project thread... - 306Dan - 23-10-2014
You need chrome 16v badges on those quarters to achieve the "I ram raided halfords" look
RE: should really start a project thread... - toseland - 23-10-2014
I can't put a turbo badge on the car as I actually have a turbo lol
RE: should really start a project thread... - Eeyore - 23-10-2014
ive got some gti6 badges. They were on my 1.4
RE: should really start a project thread... - toseland - 23-10-2014
ill mash up a GHDi5 badge sometime lol
RE: should really start a project thread... - Toms306 - 23-10-2014
Sounds like a new model of hair straightners...
RE: should really start a project thread... - jammapic - 23-10-2014
They normally run about 15% transmission loss from experience... That's about 135hp at the fly - good power, must be a strong one!
JP
RE: should really start a project thread... - Poodle - 25-10-2014
Sounds mint.
(23-10-2014, 05:07 PM)Toms306 Wrote: Sounds like a new model of hair straightners...
The new iphone integrated model.
RE: should really start a project thread... - puglove - 22-11-2014
Do you actually own a 306 now Mike??
RE: should really start a project thread... - toseland - 23-11-2014
yeah mate, lol toms old one..
RE: should really start a project thread... - puglove - 23-11-2014
Is that chris harris old china 1 ?
RE: should really start a project thread... - Toms306 - 23-11-2014
Nope. Moonstone DTurbo HDi. This thread could do with pics tbf lol...