identify these calipers.. - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22) +--- Forum: Suspension, Transmission, Handling & Braking (https://www.306oc.co.uk/forum/forumdisplay.php?fid=19) +--- Thread: identify these calipers.. (/showthread.php?tid=27140) |
identify these calipers.. - eskimogod - 11-10-2014 Had these calipers sat in the garage for ages only thing I can think there from is a gti6 anyone able to confirm this..? Would be very usefull if they are as found a beam with no rear calipers.. RE: identify these calipers.. - Piggy - 11-10-2014 Gti/hdi/dturbo/xsi... Basically any rear disc beam 306!! RE: identify these calipers.. - John1.4 - 11-10-2014 iirc all the disc rears are the same, all 247mm solids, so they could potentially be from a 106/saxo? but should work fine, sure someone'll be along soon if i'm wrong mind RE: identify these calipers.. - eskimogod - 11-10-2014 Sweet cheers guys just as long as they will fit on a disc beam! Had them that long could have been off anything lol. RE: identify these calipers.. - welshpug - 11-10-2014 theyre not all the same, some have 30mm pistons as opposed to 32mm, peel the dust boot off and measure the piston as it comes out of the body. |