3/ 2.5 inch silencer and exhaust manifold

3/ 2.5 inch silencer and exhaust manifold - Printable Version

+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26)
+--- Forum: Misc & Wanted (https://www.306oc.co.uk/forum/forumdisplay.php?fid=14)
+--- Thread: 3/ 2.5 inch silencer and exhaust manifold (/showthread.php?tid=26947)

3/ 2.5 inch silencer and exhaust manifold - Chris_90 - 01-10-2014

I'm looking for a 3 inch or 2.5 inch silencer straight though (high flow?) prefer mild steel but would consider stainless.

Or if any one can point me in right direction to buy a new one at a reasonable price that would be great to Smile

Also on look out for an t2/k14 exhaust manifold cheap as possible

Thanks in advance

RE: 3/ 2.5 inch silencer - Piggy - 01-10-2014

As a back box? Smile

RE: 3/ 2.5 inch silencer - Chris_90 - 01-10-2014

(01-10-2014, 08:46 PM)Piggy Wrote: As a back box?

Yer and possibly middle silencer to depending on noise levels rather keep it quiet as possible but with out restricting it

RE: 3/ 2.5 inch silencer and exhaust manifold - Piggy - 01-10-2014

Got a load of bits here cheap if you wana make a custom system for yaself?!

RE: 3/ 2.5 inch silencer and exhaust manifold - Chris_90 - 01-10-2014

(01-10-2014, 10:00 PM)Piggy Wrote: Got a load of bits here cheap if you wana make a custom system for yaself?!

What bits? I am making my own system got 3 inch v band 3 inch tight bend and 3 inch 45 degree, so there on after i need bits for gonna reduce to 2.5 tho as no for 3 inch all way

RE: 3/ 2.5 inch silencer and exhaust manifold - Piggy - 01-10-2014

I'll check the sizing

RE: 3/ 2.5 inch silencer and exhaust manifold - Chris_90 - 01-10-2014

(01-10-2014, 10:05 PM)Piggy Wrote: I'll check the sizing

Ok thanks

RE: 3/ 2.5 inch silencer and exhaust manifold - Chris_90 - 04-10-2014

Bump Smile

RE: 3/ 2.5 inch silencer and exhaust manifold - Chris_90 - 09-10-2014

Some one must have an exhaust manifold?????