+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11)
+--- Thread: Injectors missing seals? (/showthread.php?tid=26759)
Injectors missing seals? - doogle-d turbo - 21-09-2014
Got my injectors out yesterday to re-seal them and only noticed the copper washer, no fire seal from what I can see and no plastic sleeve. Lines have been on for 35-40,000 miles and had no issues until this week where they started spitting around the seal.
Should I just replace the copper washer or would there be issues?
RE: Injectors missing seals? - Uberderv - 21-09-2014
Don't recall there being a plastic sleeve needed??? Are you sure the fire seal isn't stuck to the head with carbon? If not I'd fit some when you do the copper washers.
Injectors missing seals? - doogle-d turbo - 21-09-2014
Ok mate just going by the Haynes Manual, I'm thinking the fire seal is stuck to the block. I take it they are smaller and sit below the copper washer? Cheers
RE: Injectors missing seals? - Piggy - 21-09-2014
Thats right, need a decent pick like tool to get them out
RE: Injectors missing seals? - ADV_93 - 22-09-2014
Do the fire seals compress between the injector nozzle and the head?
RE: Injectors missing seals? - mr_fish - 22-09-2014
(22-09-2014, 01:54 PM)ADV_93 Wrote: Do the fire seals compress between the injector nozzle and the head?
You got it.
Technically I would say it's the injector seat but who's being pedantic.
