+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Suspension, Transmission, Handling & Braking (https://www.306oc.co.uk/forum/forumdisplay.php?fid=19)
+--- Thread: hubs (/showthread.php?tid=26635)
hubs - cluskie - 14-09-2014
I need new hubs as the bolt holes in mine have no thread left. Do I need specific ones to the engine / driveshafts or will any work?
Probably a daft question but need to get the car fixed and sold and don't want to be ordering some that won't fit
RE: hubs - Paul_13 - 14-09-2014
You'll need to check what size the ball joints are. I know 18mm only come on certain models but yours may of been messed with.
RE: hubs - Toms306 - 14-09-2014
Phase 3 will almost certainly be 18mm bjs. But apart from that, any hub should fit from a 1.8+. The 1.4/1.6 may be different though, not sure on that.
RE: hubs - cluskie - 14-09-2014
Mines a 1.8 phase 3 but will measure it and have a shop around cheers
RE: hubs - Piggy - 14-09-2014
Measure those ball joints...there is no 'almost certain'! Lol
RE: hubs - Toms306 - 14-09-2014
There is, I'm yet to see a ph3 with 16mm BJs lol. Though there is obviously the chance that a previous owner has replaced with an older 16mm hub.
RE: hubs - 306gtiparts - 14-09-2014
(14-09-2014, 10:58 AM)Toms306 Wrote: There is, I'm yet to see a ph3 with 16mm BJs lol. Though there is obviously the chance that a previous owner has replaced with an older 16mm hub.
Yes phase 3 will certainly be 18mm ball joints unless someone has changed them to 16mm :-)