+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Interior, Exterior, ICE (https://www.306oc.co.uk/forum/forumdisplay.php?fid=12)
+--- Thread: Centre console dash bottom piece grrrrr (/showthread.php?tid=26399)
Centre console dash bottom piece grrrrr - Razorback_Rob - 31-08-2014
Anyone work out what might be wrong here?
https://vimeo.com/104863859
All pieces push in fully and flush but touching a button or putting in an in car charger causes this
. Everything's screwed in as it's meant to be.
RE: Centre console dash bottom piece grrrrr - Piggy - 31-08-2014
Haha...thats amazing!
Centre console dash bottom piece grrrrr - Razorback_Rob - 31-08-2014
[ quote='Piggy' pid='468836' dateline='1409509723']
Haha...thats amazing!
[/quote]
Blooming annoying more like!
https://vimeo.com/104865539
Why can't I have a 306 without some kind of funny quirk [LOUDLY CRYING FACE]
RE: Centre console dash bottom piece grrrrr - Slam Wagon - 31-08-2014
Ejecto dasho, have you tried loosening the screws off, give it a wiggle and do it all back up?
RE: Centre console dash bottom piece grrrrr - Toms306 - 31-08-2014
Lol. The metal clips on the back are moveable, I bet yours have moved so the trims touching the buttons...
RE: Centre console dash bottom piece grrrrr - WiNgNuTz - 31-08-2014
Never seen that before...the dash in my DT was the exact opposite though, took nothing short of a pry bar to remove the bottom section! I don't think Tom is far off the mark though, have you checked the metal clips?
Centre console dash bottom piece grrrrr - Razorback_Rob - 31-08-2014
(31-08-2014, 07:49 PM) Slam Wagon Wrote: Ejecto dasho, have you tried loosening the screws off, give it a wiggle and do it all back up?
I was wondering if moving the clock section about might help.
(31-08-2014, 07:54 PM)WiNgNuTz Wrote:
Never seen that before...the dash in my DT was the exact opposite though, took nothing short of a pry bar to remove the bottom section! I don't think Tom is far off the mark though, have you checked the metal clips?
I've only checked that they're all intact. In what way are they supposed to move?
![[Image: 08fe81f70eb6980af3a0063e761c5adf.jpg]](http://tapatalk.imageshack.com/v2/14/08/31/08fe81f70eb6980af3a0063e761c5adf.jpg)
RE: Centre console dash bottom piece grrrrr - seanyleary - 01-09-2014
Super glue
Centre console dash bottom piece grrrrr - Razorback_Rob - 01-09-2014
(01-09-2014, 11:33 AM)seanyleary Wrote: Super glue
I've thought about it but it's the hassle when I want to take it off again.
RE: Centre console dash bottom piece grrrrr - Adam-m-h - 01-09-2014
May sound daft have u put the top edge first then a firm push on the bottom till the clips click in.
Centre console dash bottom piece grrrrr - Razorback_Rob - 01-09-2014
(01-09-2014, 11:53 AM)Adam-m-h Wrote: May sound daft have u put the top edge first then a firm push on the bottom till the clips click in.
Yeah I've tried all kindsa methods. From middle out. Right clips to left. Bottom to top. Top to bottom.
RE: Centre console dash bottom piece grrrrr - Adam-m-h - 01-09-2014
I took mine out for painting and found the metals clips had slid forward slightly and hazard light wasn't sat right and had really push it in (sorry it's not much help
)
RE: Centre console dash bottom piece grrrrr - Toms306 - 01-09-2014
Hmm, your metal clips do look in the right place in that pic. Not sure what to suggest... Well, maybe just don't use the buttons, can't remember last time I used the demister lol!
Centre console dash bottom piece grrrrr - Razorback_Rob - 01-09-2014
Hmm I may have to play about see what I can get to work! I'll see if I can borrow a piece from a friend see if it's the plastic piece or the dash holes...
Re: Centre console dash bottom piece grrrrr - kentiiboii - 01-09-2014
Just strip the console down and refit it.
Its not that much work and youll find the problem.
Centre console dash bottom piece grrrrr - Razorback_Rob - 01-09-2014
(01-09-2014, 12:15 PM)kentiiboii Wrote: Just strip the console down and refit it.
Its not that much work and youll find the problem.
I was thinking about that actually!