+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11)
+--- Thread: Big rust hole :( (/showthread.php?tid=25653)
Big rust hole :( - daveylennon93 - 01-08-2014
Found this 2day. Pretty common to go there anyway.
Be hard fixed?
RE: Big rust hole :( - Mark - 01-08-2014
I found mine quite hard to fix and time consuming with all the rust removing and making/shaping a new piece to go in. I hadn't welded before so took a little while to get the hang of it but in the end I was quite happy with the result
[attachment=18099]
RE: Big rust hole :( - daveylennon93 - 01-08-2014
Good job for not havin welded b4 that.
I have a crashed 306 here was just goin to cut out the same piece out of that and weld it in.
RE: Big rust hole :( - Mark - 01-08-2014
Thanks, it's not pretty but solid. That would make things easier as it'll save you messing around trying to shape it....providing your crashed 306 doesn't have rust there.
RE: Big rust hole :( - bashbarnard - 01-08-2014
My hatch was really.bad had to replace entire inner rear quarter. Have a look at my old project thread. A bit of patience and anything is possible. If you want go to scrappy find a good one and cut the section out you want. That way you know it fits
RE: Big rust hole :( - daveylennon93 - 01-08-2014
No the crashed one is 100% rust free which is a 1st.
Pug really did f*ck up not puttin the wheel liner in the rear on the phase 1s.
Yeah ill chek that proj thread out. Cheers